Khabbazabkenar, Sirous and Ergene, Arzu and Gülgün, Mehmet Ali and Ow-Yang, Cleva W. (2024) "Boron oxide influencing phase transformations in Eu and Dy co-doped Sr4Al14O25 exhibiting persistent luminescence", Journal of the American Ceramic Society, Vol.107, No.10, 6999-7017 (SCI)
Ebrahimpour Ahmadi, Vahid and Güler, Tayfun and Amin, Saifa and Apak, Ahmet Muhtar and Apak, Alper and Parlak, Murat and Tastan, Umur and Kaya, İsmet İnönü and Sadaghiani, Abdolali Khalili and Koşar, Ali (2024) "Effect of graphene coating on flow boiling in a minichannel at sub-atmospheric pressures", International Journal of Heat and Mass Transfer, Vol.229 (SCI)
Rokhsar Talabazar, Farzad and Baresel, Christian and Ghorbani, Reza and Tzanakis, Iakovos and Koşar, Ali and Grishenkov, Dmitry and Ghorbani, Morteza (2024) "Removal of per- and polyfluoroalkyl substances (PFAS) from wastewater using the hydrodynamic cavitation on a chip concept", Chemical Engineering Journal, Vol.495 (SCI)
Kantarcıoğlu Mazmanoğlu, Işık and Gaszek, Ilona K. and Güçlü, Tandaç Fürkan and Yildiz, M. Sadik and Atılgan, Ali Rana and Toprak, Erdal and Atılgan, Canan (2024) "Structural shifts in TolC facilitate efflux-mediated β-lactam resistance", Communications Biology, Vol.7, No.1 (SCI)
Berksöz, Melike and Atılgan, Canan (2024) "Allosteric modulation of fluorescence revealed by hydrogen bond dynamics in a genetically encoded maltose biosensor", Proteins: Structure, Function and Bioinformatics, Vol.92, No.8, 923-932 (SCI)
Ma, M. and Welles, N. and Svitelskiy, O. and Yanık, Cenk and Kaya, İsmet İnönü and Hanay, M. S. and Paul, M. R. and Ekinci, K. L. (2024) "Mode-dependent scaling of nonlinearity and linear dynamic range in a NEMS resonator", Applied Physics Letters, Vol.125, No.8 (SCI)
Sadaghiani, Ali and Parizad Benam, Behnam and Akdağ, Osman and Saygan, Samet and Koşar, Ali (2024) "Experimental parametric study on two-phase spray cooling of HEF 7100 using flat spray nozzles", International Journal of Thermofluids, Vol.23 (NA)
Karacaoğlu, Beyza and Koçer, Anıl Tevfik and İnan, Benan and
Bütün, İsmail and
Mercimek, Rabia and
Ghorbani, Morteza and
Koşar, Ali and Balkanlı, Didem (2024) "Microfluidic chip-assisted separation process and post-chip microalgae cultivation for carotenoid production". Published Online First
https://dx.doi.org/10.1007/s10811-024-03337-4Rekuviene, Regina and Saeidiharzand, Shaghayegh and Mažeika, Liudas and Samaitis, Vykintas and Jankauskas, Audrius and Sadaghiani, Abdolali Khalili and Gharıb, Ghazaleh and Muganlı, Zülal and Koşar, Ali (2024) "A review on passive and active anti-icing and de-icing technologies", Applied Thermal Engineering, Vol.250 (SCI)
Saeidiharzand, Shaghayegh and
Sadaghiani, Abdolali Khalili and Orejon, Daniel and Sefiane, Khellil and
Koşar, Ali (2024) "Biphilic functional surfaces for frost prevention and efficient active defrosting". Published Online First
https://dx.doi.org/10.1002/admi.202400412 Ateşpare, Asu Ece and
Behroozi Kohlan, Taha and
Salamatgharamaleki, Saeed and
Yıldız, Mehmet and
Menceloğlu, Yusuf Z. and
Ünal, Serkan and
Dızman, Bekir (2024) "Poly(2-alkyl/aryl-2-oxazoline)-imidazole complexes as thermal latent curing agents for epoxy resins". Published Online First
https://dx.doi.org/10.1021/acsomega.4c03904 Basaran, Mustafa and Turkmen, Halit Suleyman and Yıldız, Mehmet (2024) "Sensor-enhanced thick laminated composite beams: manufacturing, testing, and numerical analysis", Sensors, Vol.24, No.16 (SCI)
Akhlaghi, Omid and Camposilvan, Erik and Garnier, Vincent and Goharibajestani, Zahra and Khabbazabkenar, Sirous and Ow-Yang, Cleva W. and Jorand, Yves and Gremillard, Laurent and Chevalier, Jérôme (2024) "Conventional sintering of nano-crystalline Yttria-Stabilized Zirconia enables high-strength, highly translucent and opalescent dental ceramics", Dental Materials, Vol.40, No.7, 1031-1040 (SCI)
Maleki, Mohammadamin and Rokhsar Talabazar, Farzad and Koşar, Ali and Ghorbani, Morteza (2024) "On the spatio-temporal dynamics of cavitating turbulent shear flow over a microscale backward-facing step: a numerical study", International Journal of Multiphase Flow, Vol.177 (SCI)
Al-Nadhari, Abdulrahman Saeed Abdulqader and Kheyabani, Aryan and Kefal, Adnan and Topal, Serra and Yıldız, Mehmet (2024) "Effective multiscale structural analysis of thick sandwich structures with 3D woven composite face sheets and a soft core based on coupled micromechanics and refined zigzag theory", Composite Structures, Vol.337 (SCI)
Abdelrahman, Amr Mustafa and Tebyani, Seyedreza and Rokhsar Talabazar, Farzad and Tabar, Saba Aghdam and Berenji, Nastaran Rahimzadeh and Sheibaniaghdam, Araz and Koyuncu, Ismail and Koşar, Ali and Guven, Huseyin and Ersahin, Mustafa Evren and Ghorbani, Morteza and Ozgun, Hale (2024) "The flow pattern effects of hydrodynamic cavitation on waste activated sludge digestibility", Chemosphere, Vol.357 (SCI)
Bahmani Jalali, Houman and Sadeghi, Sadra and Baylam, Isinsu and Han, Mertcan and Ow-Yang, Cleva W. and Sennaroğlu, Alphan and Nizamoğlu, Sedat (2024) "Erratum to: Exciton recycling via InP quantum dot funnels for luminescent solar concentrators (Nano Research, (2021), 14, 5, (1488-1494), 10.1007/s12274-020-3207-9)", Nano Research, Vol.17, No.6, 5756-5756 (SCI)
Özyiğit, Samet and Mehdipour Aghbolagh, Mostafa and Al-Nadhari, Abdulrahman Saeed Abdulqader and Tabrizi, Arvin T. and Doğan, Semih and Dericiler, Kuray and Beylergil, Bertan and Yıldız, Mehmet and Saner Okan, Burcu (2024) "A comprehensive experimental study on the effects of hexagonal boron nitride particle size and loading ratio on thermal and mechanical performance in epoxy composites", Journal of Composite Materials, Vol.58, No.13 (SCI)
Mohammadilooey, Mandana and Parizad Benam, Behnam and Ateş, Ayşenur and Yagcı, Vedat and Çaglar Malyemez, Muhammed and Parlak, Murat and Sadaghiani, Abdolali Khalili and Koşar, Ali (2024) "Multiple hot spot cooling with flow boiling of HFE-7000 in a multichannel pin fin heat sink", Applied Thermal Engineering, Vol.247 (SCI)
Barzegar Osgouei, Ali and Karimi, Sasan and Şaş Çaycı, Hatice Sinem and Yıldız, Mehmet (2024) "Enhancing interlaminar bonding quality estimation in laser-assisted fiber placement of CF/PEKK composites: a correction factor approach for improved prediction of intimate contact", Composites Part A: Applied Science and Manufacturing, Vol.181 (SCI)
Bütün, İsmail and Çelik, Süleyman and Dönmez, Koray Bahadır and Yürüm, Alp and Alkan Gürsel, Selmiye and Koşar, Ali (2024) "The effect of current collectors on polymer-based energy-generating units inspired by the electric organs of eels", Journal of Energy Storage, Vol.90, No.Part A (SCI)
Seçer, Ragıp Orkun and Nedjad, Syamak Hossein and Yıldız, Mehmet (2024) "Extending a phase field model of polycrystalline solidification for simulating grain evolution in metal additive manufacturing", Computational Materials Science, Vol.240 (SCI)
Farrokhnemoun, Darya and Sajjadivand, Seyyedehshahrzad and Parapari, Sorour Semsari and Sturm, Saso and Ow-Yang, Cleva W. and Gülgün, Mehmet Ali (2024) "Influence of sodium hydroxide on phase transformation of gamma alumina to alpha alumina", Journal of the American Ceramic Society, Vol.107, No.5, 3451-3463 (SCI)
Rekuvienė, Regina and Samaitis, Vykintas and Jankauskas, Audrius and Sadaghiani, Abdolali Khalili and Saeidiharzand, Shaghayegh and Koşar, Ali (2024) "Early-stage ice detection utilizing high-order ultrasonic guided waves", Sensors, Vol.24, No.9 (SCI)
Ateş, Ayşenur and Yağcı, Vedat and Malyemez, Muhammed Çağlar and Parlak, Murat and Sadaghiani, Abdolali Khalili and Koşar, Ali (2024) "Flow dynamics characteristics of flow boiling in minichannels with distributed pin fin structures", International Journal of Thermal Sciences, Vol.199 (SCI)
Yıldırım, Ceren and Ulus, Hasan and Beylergil, Bertan and Al-Nadhari, Abdulrahman Saeed Abdulqader and Topal, Serra and Yıldız, Mehmet (2024) "Tailoring adherend surfaces for enhanced bonding in CF/PEKK composites: comparative analysis of atmospheric plasma activation and conventional treatments", Composites Part A: Applied Science and Manufacturing, Vol.180 (SCI)
Karimi, Sasan and Yousefi Louyeh, Pouya and Barzegar Osgouei, Ali and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2024) "A study of post-processing for AFP-fabricated thermoplastic composites with void content and air permeability characterization", Journal of Reinforced Plastics and Composites, Vol.43, No.9-10, 490-503 (SCI)
Samancoğlu, Umut Ege and Koşar, Ali and Cetkin, Erdal (2024) "Optimization of Y-shaped micro-mixers with a mixing chamber for increased mixing efficiency and decreased pressure drop", ASME Journal of Heat and Mass Transfer, Vol.146, No.4 (SCI)
Durmuş Sayar, Ayşe and Tansan, Murat and Çinko Çoban, Tuğçe and Serttan, Dilay and Dızman, Bekir and Yıldız, Mehmet and Ünal, Serkan (2024) "Incorporation of graphene nanoplatelets into fiber-reinforced polymer composites in the presence of highly branched waterborne polyurethanes", Polymers, Vol.16, No.6 (SCI)
Kheyabani, Aryan and Ali, Hafiz Qasim and Kefal, Adnan and Yıldız, Mehmet (2024) "Coupling of isogeometric higher-order RZT and parametric HFGMC frameworks for multiscale modeling of sandwich laminates: theory and experimental validation", Aerospace Science and Technology, Vol.146 (SCI)
Zoghipour, Pouya and
Kefal, Adnan and
Yıldız, Mehmet (2024) "Structural analysis of sandwich plates with variable stiffness composite skins and functionally graded cores using refined zig-zag theory". Published Online First
https://dx.doi.org/10.1080/15376494.2024.2323098 Abdali, Amirreza and Hossein Nedjad, Syamak and Hamed Zargari, Habib and Saboori, Abdollah and Yıldız, Mehmet (2024) "Predictive tools for the cooling rate-dependent microstructure evolution of AISI 316L stainless steel in additive manufacturing", Journal of Materials Research and Technology, Vol.29, 5530-5538 (SCI)
Sharbati, Pouya and Sadaghiani, Abdolali Khalili and Koşar, Ali (2024) "On the effect of static and dynamic contact angles on humid air condensation heat transfer", International Journal of Heat and Mass Transfer, Vol.219 (SCI)
Isik, Murat and Emami Tabrizi, Isa and Khan, Raja Muhammad Awais and Yıldız, Mehmet and Aydoğan, Eda and Koç, Bahattin (2024) "The effect of additively and subtractively created center internal features on microstructure and mechanical performance of inconel-718 parts", Rapid Prototyping Journal, Vol.30, No.2, 287-304 (SCI)
Kömürcü, Emre and Kefal, Adnan and Abdollahzadeh, M. A. and Basoglu, M. F. and Kısa, Erdal and Yıldız, Mehmet (2024) "Towards composite suspension control arm: conceptual design, structural analysis, laminate optimization, manufacturing, and experimental testing", Composite Structures, Vol.327 (SCI)
Ebrahimpour Ahmadi, Vahid and Güler, Tayfun and Çelik, Süleyman and Ronshin, Fedor and Serdyukov, Vladimir and Surtaev, Anton and Sadaghiani, Abdolali Khalili and Koşar, Ali (2024) "Effect of mixed wettability surfaces on flow boiling heat transfer at subatmospheric pressures", Applied Thermal Engineering, Vol.236 (SCI)
Vakilha, M. and Saghatchi, Roozbeh and Alexiadis, A. and Yıldız, Mehmet and Shadloo, M. S. (2024) "A fully explicit incompressible smoothed particle hydrodynamics approach for modeling transient heat transfer and thermo-capillary flows", Computers and Fluids, Vol.269 (SCI)
Singh, Madalsa and Yüksel, Tuğçe and Michalek, Jeremy J. and Azevedo, Inês M.L. (2024) "Ensuring greenhouse gas reductions from electric vehicles compared to hybrid gasoline vehicles requires a cleaner U.S. electricity grid", Scientific Reports, Vol.14, No.1 (SCI)
Kozalak, Gül and Koşar, Ali (2023) "Autophagy-related mechanisms for treatment of multiple myeloma", Cancer Drug Resistance, Vol.6, No.4, 838-857 (ESCI)
Aktas, Busra and Bal, Batuhan and Sezen, Meltem and Ow-Yang, Cleva W. and Unver, M. Unsal and Buyukaksoy, Aligul (2023) "Solution processed La0.8Sr0.2MnO3-Bi1.44Y0.56O3 composite thin films with self-assembled nanolayered structures", MRS Communications, Vol.13, No.6, 1357-1362 (SCI)
Yıldırım, Ceren and Tabrizi, Isa Emami and Al-Nadhari, Abdulrahman Saeed Abdulqader and Topal, Serra and Beylergil, Bertan and Yıldız, Mehmet (2023) "Characterizing damage evolution of CF/PEKK composites under tensile loading through multi-instrument structural health monitoring techniques", Composites Part A: Applied Science and Manufacturing, Vol.175 (SCI)
Al-Nadhari, Abdulrahman Saeed Abdulqader and Şenol, Halil and Topal, Serra and Ulus, Hasan and Yıldız, Mehmet (2023) "The effect of multiscale Kevlar/Glass hybridization on the mechanical properties and the damage evolution of 3D orthogonal woven composites under flexural and impact loadings", Composites Part A: Applied Science and Manufacturing, Vol.175 (SCI)
Behroozi Kohlan, Taha and Ateşpare, Asu Ece and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Ünal, Serkan and Dızman, Bekir (2023) "Amphiphilic polyoxazoline copolymer-imidazole complexes as tailorable thermal latent curing agents for one-component epoxy resins", ACS Omega, Vol.8, No.49, 47173-47186 (SCI)
Gul, Saher and Arican, Selin and Cansever, Murat and Yıldız, Mehmet and Saner Okan, Burcu (2023) "Dimension effect on thermal conductivity of hexagonal boron nitride/titanium dioxide reinforced hybrid PEEK composites developed with a scalable compounding approach", Polymer Composites, Vol.44, No.12, 8669-8682 (SCI)
Işık, Murat and Yıldız, Mehmet and Seçer, Ragıp Orkun and Sen, Ceren and Bilgin, Guney Mert and Orhangul, Akin and Akbulut, Guray and Javidrad, Hamidreza and Koç, Bahattin (2023) "Fabrication of electron beam melted titanium aluminide: the effects of machining parameters and heat treatment on surface roughness and hardness", Metals, Vol.13, No.12 (SCI)
Ali, Hafiz Qasim and Wagner, H. N. R. and Akalın, C. and Tabrizi, I. E. and Hühne, C. and Yıldız, Mehmet (2023) "Buckling and fracture analysis of thick and long composite cylinders with cutouts under axial Compression: an experimental and numerical campaign", Composite Structures, Vol.324 (SCI)
Ranjbar Aghjehkohal, Amin and Taghizadeh Tabrizi, Arvin and Yıldız, Mehmet (2023) "Electrochemical hydrogen storage of synthesized heterostructure of hexagonal boron nitride-carbon nano tube", Journal of Alloys and Compounds, Vol.962 (SCI)
Gress, H. and Barbish, J. and Yanık, Cenk and Kaya, İsmet İnönü and Erdogan, R. T. and Hanay, M. S. and González, M. and Svitelskiy, O. and Paul, M. R. and Ekinci, K. L. (2023) "Multimode Brownian dynamics of a nanomechanical resonator in a viscous fluid", Physical Review Applied, Vol.20, No.4 (SCI)
Dericiler, Kuray and Hezarkhani, Marjan and Emami Tabrizi, Isa and Doğan, Semih and Berktaş, İlayda and Erdem, Emre and Advani, Suresh G. and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem and Saner Okan, Burcu (2023) "Effect of interleaved electrolyte forms on macro-scaled structural hybrid supercapacitors with asymmetric configurations of graphene-coated carbon fabric electrodes", Applied Composite Materials, Vol.30, No.5, 1435-1451 (SCI)
Seyednourani, Mahsa and Akgün, Sercan and Ulus, Hasan and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2023) "Experimental investigation on compression-after-impact (CAI) response of aerospace grade thermoset composites under low-temperature conditions assisted with acoustic emission monitoring", Composite Structures, Vol.321 (SCI)
Cagatay Karakan, M. and Ari, Atakan B. and Kelleci, Mehmet and Yanık, Cenk and Kaya, İsmet İnönü and Taştan, Öznur and Selim Hanay, M. (2023) "Vapor sensing of colorectal cancer biomarkers in isolation by bare and functionalized nanoelectromechanical sensors", IEEE Sensors Journal, Vol.23, No.18, 21113-21120 (SCI)
Karimzadehkhoei, Jalal and Sorayani Bafqi, Mohammad Sajad and Saeidiharzand, Shaghayegh and Mohammadilooey, Mandana and Hezarkhani, Marjan and Saner Okan, Burcu and Koşar, Ali and Sadaghiani, Abdolali (2023) "Upcycled graphene integrated fiber-based photothermal hybrid nanocomposites for solar-driven interfacial water evaporation", Desalination, Vol.562 (SCI)
Barzegar Osgouei, Ali and Karimi, Sasan and Sukur, Emine Feyza and Şaş Çaycı, Hatice Sinem and Yıldız, Mehmet (2023) "Effect of fiber orientation on temperature history during laser-assisted thermoplastic fiber placement", Journal of Reinforced Plastics and Composites, Vol.42, No.17-18, 953-968 (SCI)
Yıldırım, Ceren and Ulus, Hasan and Beylergil, Bertan and Al-Nadhari, Abdulrahman Saeed Abdulqader and Topal, Serra and Yıldız, Mehmet (2023) "Effect of atmospheric plasma treatment on Mode-I and Mode-II fracture toughness properties of adhesively bonded carbon fiber/PEKK composite joints", Engineering Fracture Mechanics, Vol.289 (SCI)
Çetin, Ebru and Güçlü, Tandaç Fürkan and Kantarcıoğlu, Işık and Gaszek, Ilona K. and Toprak, Erdal and Atılgan, Ali Rana and Dedeoglu, Burcu and Atılgan, Canan (2023) "Kinetic barrier to enzyme inhibition is manipulated by dynamical local interactions in E. coli DHFR", Journal of Chemical Information and Modeling, Vol.63, No.15, 4839-4849 (SCI)
Neshat, Najmeh and Kaya, Murat and Ghaboulian Zare, Sara (2023) "Exploratory policy analysis for electric vehicle adoption in European countries: a multi-agent-based modelling approach", Journal of Cleaner Production, Vol.414 (SCI)
Maleki, Mohammadamin and Rokhsar Talabazar, Farzad and Seyedmirzaei Sarraf, Seyedali and Sheibani Aghdam, Araz and Bayraktar, Songül and Tuzcuoğlu, Ehsan and Koşar, Ali and Ghorbani, Morteza (2023) "Detergent dissolution intensification via energy-efficient hydrodynamic cavitation reactors", ACS Omega, Vol.8, No.32, 29595-29607 (SCI)
Şükür, Emine Feyza and Elmas, Sinem Gül and Eskizeybek, Volkan and Şaş Çaycı, Hatice Sinem and Yıldız, Mehmet (2023) "An experimental implication of long-term hot-wet-aged carbon fiber/polyether ketone ketone composites: the impact of automated fiber placement process parameters and process-induced defects", Journal of Applied Polymer Science, Vol.140, No.29 (SCI)
Ali, Hafiz Qasim and Aydin, Mehmet Serhat and Awais Khan, Raja Muhammad and Yıldız, Mehmet (2023) "The role of "thickness effect" on the damage progression and crack growth inside the plain-woven carbon fiber composites", Composites Science and Technology, Vol.241 (SCI)
Ali, Hafiz Qasim and Kheyabani, Aryan and Akalın, Cagdas and Kefal, Adnan and Yıldız, Mehmet (2023) "Numerical and experimental methodologies to investigate the damage progression inside the axisymmetric composite cylinders with cutouts under torsion", Composite Structures, Vol.315 (SCI)
Tavakol Aghaei, Vahid and Ağababaoğlu, Arda and Bawo, Biram and Naseradinmousavi, Peiman and Yıldırım, Sinan and Yeşilyurt, Serhat and Onat, Ahmet (2023) "Energy optimization of wind turbines via a neural control policy based on reinforcement learning Markov chain Monte Carlo algorithm", Applied Energy, Vol.341 (SCI)
Namlı, İlayda and Karavelioglu, Zeynep and Seyedmirzaei Sarraf, Seyedali and Sheibani Aghdam, Araz and Varol, Rahmetullah and Yilmaz, Abdurrahim and Şahin, Sevilay Burcu and Özogul, Beyzanur and Bozkaya, Dila Naz and Acar, Havva Funda and Uvet, Huseyin and Çetinel, Sibel and Kutlu, Özlem and Ghorbani, Morteza and Koşar, Ali (2023) "On the application of hydrodynamic cavitation on a chip in cellular injury and drug delivery", Lab On a Chip, Vol.23, No.11, 2640-2653 (SCI)
Kayacık, Sezen Ece and Kocuk, Burak and Yüksel, Tuğçe (2023) "The promise of EV-aware multi-period optimal power flow problem: cost and emission benefits", Sustainable Energy, Grids and Networks, Vol.34 (SCI)
Saeidfar, Asal and Yeşilyurt, Serhat (2023) "Numerical investigation of the effects of catalyst layer composition and channel to rib width ratios for low platinum loaded PEMFCs", Applied Energy, Vol.339 (SCI)
Akgün, Sercan and Şenol, Cahit Orhun and Kılıç, Göktuğ and Tabrizi, Isa Emami and Yıldız, Mehmet (2023) "A novel damage evaluation of CFRPs under mode-I loading by using multi-instrument structural health monitoring methods", Engineering Fracture Mechanics, Vol.286 (SCI)
Khan, Raja Muhammad Awais and Shafighfard, Torkan and Ali, Hafiz Qasim and Mieloszyk, Magdalena and Yıldız, Mehmet (2023) "Strength prediction and experimental damage investigations of plain woven CFRPs with interacting holes using multi-instrument measurements", Polymer Composites, Vol.44, No.6, 3594-3609 (SCI)
Alhamwi, Almotasem Belah and Atılgan, Canan and Sensoy, Ozge (2023) "Nonlocal effects of antibiotic-resistance-causing mutations reveal an alternative region for targeting on FtsW-penicillin-binding protein 3 complex of haemophilus influenzae", Journal of Chemical Information and Modeling, Vol.63, No.10, 3094-3104 (SCI)
Muganlı, Zülal and Saeidiharzand, Shaghayegh and Rekuviene, Regina and Samaitis, Vykintas and Jankauskas, Audrius and Koşar, Ali and Gharıb, Ghazaleh and Sadaghiani, Abdolali (2023) "Development and implementation of microbial antifreeze protein based coating for anti-icing", Advanced Materials Interfaces, Vol.10, No.14 (SCI)
Ergene, Arzu and Khabbazabkenar, Sirous and Şenol, Ayça and Günay, Ece and Kurt, Hasan and Topcu, Gökhan and Ow-Yang, Cleva W. (2023) "Oxide glass formers extending persistent luminescence in Eu and Dy co-doped strontium aluminates", Journal of Luminescence, Vol.257 (SCI)
Saeidiharzand, Shaghayegh and Sadaghiani, Abdolali and Yürüm, Alp and Koşar, Ali (2023) "Multiscale superhydrophobic zeolitic imidazolate framework coating for static and dynamic anti-icing purposes", Advanced Materials Interfaces, Vol.10, No.15 (SCI)
Yılmaz, Çağatay and Ali, Hafiz Qasim and Yıldız, Mehmet (2023) "Monitoring and verification of micro-strain generated inside the laminate subjected to thermal loading through fiber bragg grating sensors and classical laminate theory", Polymer Composites, Vol.44, No.5, 2956-2965 (SCI)
Beylergil, Bertan and Al-Nadhari, Abdulrahman Saeed Abdulqader and Yıldız, Mehmet (2023) "Optimization of Charpy-impact strength of 3D-printed carbon fiber/polyamide composites by Taguchi method", Polymer Composites, Vol.44, No.5, 2846-2859 (SCI)
Sharbati, Pouya and Sadaghiani, Abdolali and Koşar, Ali (2023) "New generation dielectrophoretic-based microfluidic device for multi-type cell separation", Biosensors, Vol.13, No.4 (SCI)
Malekabadi, Fatemeh and Caldag, Hakan Osman and Yeşilyurt, Serhat (2023) "Acoustic radiation forces and torques on elastic micro rings in standing waves", Journal of Fluids and Structures, Vol.118 (SCI)
Goral, Levent and Sezen, Meltem and Ow-Yang, Cleva W. and Günhan, Büşra and Buyukaksoy, Aligul (2023) "Evolution of elemental distribution in single liquid precursor-derived nanocomposite solid oxide cell electrodes at nanoscale and its impact on electrochemical performance stability", Journal of Solid State Electrochemistry, Vol.27, No.3, 655-666 (SCI)
Ateş, Ayşenur and Çelik, Süleyman and Yağcı, Vedat and Çağlar Malyemez, Muhammed and Parlak, Murat and Sadaghiani, Abdolali Khalili and Koşar, Ali (2023) "Flow boiling of dielectric fluid HFE – 7000 in a minichannel with pin fin structured surfaces", Applied Thermal Engineering, Vol.223 (SCI)
Ali, Hafiz Qasim and Khan, Raja M. A. and Tabrizi, Isa E. and Yıldız, Mehmet (2023) "An experimental multi-instrumental approach to understand the size effect on the damage propagation of plain-woven CFRP composites under shear loading", Journal of Composite Materials, Vol.57, No.5, 955-966 (SCI)
Liu, Gökşin and Ekmen, Erhan and Jalalypour, Farzaneh and Mertens, Haydyn D. T. and Jeffries, Cy M. and Svergun, Dmitri and Atılgan, Ali Rana and Atılgan, Canan and Sayers, Zehra (2023) "Conformational multiplicity of bacterial ferric binding protein revealed by small angle x-ray scattering and molecular dynamics calculations", Journal of Chemical Physics, Vol.158, No.8 (SCI)
Zoghipour, Pouya and Hasim, K. A. and Kefal, Adnan and Yıldız, Mehmet (2023) "Implementation of shear-locking-free triangular refined zigzag element for structural analysis of multilayered plates with curvilinear fibers", Composite Structures, Vol.305 (SCI)
Parizad Benam, Behnam and Ebrahimpour Ahmadi, Vahid and Motezakker, Ahmad Reza and Saeidiharzand, Shaghayegh and Guillermo Villanueva, Luis and Sun Park, Hyun and Sadaghiani, Abdolali Khalili and Koşar, Ali (2023) "A parametric study on pool boiling heat transfer and critical heat flux on structured surfaces with artificial cavities", Applied Thermal Engineering, Vol.221 (SCI)
Ateş, Ayşenur and Parizad Benam, Behnam and Mohammadilooey, Mandana and Çelik, Süleyman and Serdyukov, Vladimir and Surtaev, Anton and Sadaghiani, Abdolali Khalili and Koşar, Ali (2023) "Pool boiling heat transfer on superhydrophobic, superhydrophilic, and superbiphilic surfaces at atmospheric and sub-atmospheric pressures", International Journal of Heat and Mass Transfer, Vol.201, No.Part-2 (SCI)
Topal, Serra and Al-Nadhari, Abdulrahman Saeed Abdulqader and Yıldırım, Ceren and Beylergil, Bertan and Kan, Cihan and Ünal, Serkan and Yıldız, Mehmet (2023) "Multiscale nano-integration in the scarf-bonded patches for enhancing the performance of the repaired secondary load-bearing aircraft composite structures", Carbon, Vol.204, 112-125 (SCI)
Rokhsar Talabazar, Farzad and Maleki, Mohammadamin and Sheibani Aghdam, Araz and Grishenkov, Dmitry and Ghorbani, Morteza and Koşar, Ali (2023) "Cavitation inception and evolution in cavitation on a chip devices at low upstream pressures", Physics of Fluids, Vol.35, No.1 (SCI)
Kozalak, Gül and Bütün, İsmail and Toyran, Erçil and Koşar, Ali (2023) "Review on bortezomib resistance in multiple myeloma and potential role of emerging technologies", Pharmaceuticals, Vol.16, No.1 (SCI)
Saghatchi, Roozbeh and Kolukısa, Deniz Can and Yıldız, Mehmet (2023) "Development of smoothed particle hydrodynamics method for modeling active nematics", International Journal for Numerical Methods in Engineering, Vol.124, No.1, 159-182 (SCI)
Sharani, Baidaa and Haghighi Poudeh, Leila and Elmas, Sinem and Şaş Çaycı, Hatice Sinem and Yıldız, Mehmet (2023) "Aspects of halloysite nanotubes integration in epoxy nanocomposites: curing kinetics and deformation mechanism", Polymer Composites, Vol.44, No.1, 574-591 (SCI)
Shojaeian, Milad and Caldag, Hakan Osman and Bozkurt, Ayhan and Yeşilyurt, Serhat (2023) "Fabrication of magnetic helical microribbons made of nickel thin films sandwiched between silicon nitride layers for microswimming applications", Nanotechnology, Vol.34, No.1 (SCI)
Gul, Saher and Arican, Selin and Cansever, Murat and Beylergil, Bertan and Yıldız, Mehmet and Saner Okan, Burcu (2023) "Design of highly thermally conductive hexagonal boron nitride-reinforced PEEK composites with tailored heat conduction through-plane and rheological behaviors by a scalable extrusion", ACS Applied Polymer Materials, Vol.5, No.1, 329-341 (SCI)
Nedjad, Syamak Hossein and Yıldız, Mehmet and Saboori, Abdollah (2023) "Solidification behaviour of austenitic stainless steels during welding and directed energy deposition", Science and Technology of Welding and Joining, Vol.28, No.1, 1-17 (SCI)
Çetin, Ebru and Atılgan, Ali Rana and Atılgan, Canan (2022) "DHFR mutants modulate their synchronized dynamics with the substrate by shifting hydrogen bond occupancies", Journal of Chemical Information and Modeling, Vol.62, No.24, 6715-6726 (SCI)
Ilter, Metehan and Kasmer, Ramazan and Jalalypour, Farzaneh and Atılgan, Canan and Topcu, Ozan and Karakas, Nihal and Sensoy, Özge (2022) "Inhibition of mutant RAS-RAF interaction by mimicking structural and dynamic properties of phosphorylated RAS", eLife, Vol.11 (SCI)
Bütün, İsmail and Gharib, Ghazaleh and Yürüm, Alp and Alkan Gürsel, Selmiye and Koşar, Ali (2022) "Polymer based electricity generation inspired by eel electrocytes", International Journal of Energy Research, Vol.46, No.15, 22653-22663 (SCI)
Yılmaz, Abdurrahim and Karavelioğlu, Zeynep and Aydemir, Gizem and Demircali, Ali Anıl and Varol, Rahmetullah and Koşar, Ali and Uvet, Hüseyin (2022) "Microfluidic wound scratching platform based on an untethered microrobot with magnetic actuation", Sensors and Actuators B: Chemical, Vol.373 (SCI)
Akhlaghi, Omid and Camposilvan, Erik and Goharibajestani, Zahra and Khabbazabkenar, Sirous and Ow-Yang, Cleva W. and Jorand, Yves and Gremillard, Laurent and Garnier, Vincent and Chevalier, Jérôme (2022) "Transparent high-strength nanosized yttria stabilized zirconia obtained by pressure-less sintering", Journal of the European Ceramic Society, Vol.42, No.15, 7187-7195 (SCI)
Piepoli, Sofia and Barakat, Sarah Mohammed Mohammed and Noğay, Liyne and Şimşek, Büşra and Akköse, Ümit and Taşkıran, Hakan and Tolay, Nazife and Gezen, Melike and Yeşilada, Canberk Yarkın and Tuncay, Mustafa and Adebali, Ogün and Atılgan, Canan and Erman, Batu (2022) "Sibling rivalry among the ZBTB transcription factor family: homodimers versus heterodimers", Life Science Alliance, Vol.5, No.11 (SCI)
Fındık, Başak Koca and Çilesiz, Umut and Bali, Semiha Kevser and Atılgan, Canan and Aviyente, Viktorya and Dedeoğlu, Burcu (2022) "Investigation of iron release from the N- and C-lobes of human serum transferrin by quantum chemical calculations", Organic and Biomolecular Chemistry, Vol.20, No.44, 8766-8774 (SCI)
Gharıb, Ghazaleh and Bütün, İsmail and Muganlı, Zülal and Kozalak, Gül and Namlı, İlayda and Seyedmirzaei Sarraf, Seyedali and Ebrahimpour Ahmadi, Vahid and Toyran, Erçil and Van Wijnen, Andre J. and Koşar, Ali (2022) "Biomedical applications of microfluidic devices: a review", Biosensors, Vol.12, No.11 (SCI)
Kendibilir, Abdullah and Kefal, Adnan and Sohouli, A. and Yıldız, Mehmet and Koç, Bahattin and Suleman, A. (2022) "Peridynamics topology optimization of three-dimensional structures with surface cracks for additive manufacturing", Computer Methods in Applied Mechanics and Engineering, Vol.401, No.Part B (SCI)
Sheibani Aghdam, Araz and Rokhsar Talabazar, Farzad and Jafarpour, Mohammad and Koşar, Ali and Cebeci, Fevzi Çakmak and Ghorbani, Morteza (2022) "New nanofiber composition for multiscale bubble capture and separation", ACS Omega, Vol.7, No.44, 39959-39969 (SCI)
Erdöl, Sevim and Demirkal, Emrah and Öcal, Melek Türksoy and Ahsen, Ali Şems and Özkoç, Meltem Sezen and Ow-Yang, Cleva W. and Buyukaksoy, Aligul (2022) "Investigation of the necessity to apply a (Ce, Gd)O2 interlayer between the low-temperature processed (La, Sr)CoO3 electrode film and the (Zr, Y)O2 electrolyte in solid oxide fuel cells", Solid State Ionics, Vol.386 (SCI)
Ramezanzadeh, Shayan and Özbulut, Murat and Yıldız, Mehmet (2022) "A numerical investigation of the energy efficiency enhancement of oscillating water column wave energy converter systems", Energies, Vol.15, No.21 (SCI)
Şükür, Emine Feyza and Elmas, Sinem and Seyednourani, Mahsa and Eskizeybek, Volkan and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2022) "Effects of meso- and micro-scale defects on hygrothermal aging behavior of glass fiber reinforced composites", Polymer Composites, Vol.43, No.11, 8396-8408 (SCI)
Behroozi Kohlan, Taha and Ateşpare, Asu Ece and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Ünal, Serkan and Dızman, Bekir (2022) "Synthesis and structure-property relationship of amphiphilic poly(2-ethyl- co-2-(alkyl/aryl)-2-oxazoline) copolymers", ACS Omega, Vol.7, No.44, 40067-40077 (SCI)
Okamoto, Hiroshi and Firouzmandi, Reza and Miyamura, Ryosuke and Sazgari Ardakani, Vahid and Okumura, Shun and Uchita, Shota and Kaya, İsmet İnönü (2022) "TEM at millikelvin temperatures: observing and utilizing superconducting qubits", Micron, Vol.161 (SCI)
Sefiane, Khellil and Koşar, Ali (2022) "Prospects of heat transfer approaches to dissipate high heat fluxes: opportunities and challenges", Applied Thermal Engineering, Vol.215 (SCI)
Rokhsar Talabazar, Farzad and Sheibani Aghdam, Araz and Jafarpour, Mohammad and Grishenkov, Dmitry and Koşar, Ali and Ghorbani, Morteza (2022) "Chemical effects in "hydrodynamic cavitation on a chip": the role of cavitating flow patterns", Chemical Engineering Journal, Vol.445 (SCI)
Namlı, İlayda and Seyedmirzaei Sarraf, Seyedali and Sheibani Aghdam, Araz and Çelebi Torabfam, Gizem and Kutlu, Özlem and Çetinel, Sibel and Ghorbani, Morteza and Koşar, Ali (2022) "Hydrodynamic cavitation on a chip: a tool to detect circulating tumor cells", ACS Applied Materials and Interfaces, Vol.14, No.36, 40688-40697 (SCI)
Abdollahzadeh, Mohammadamin and Ali, Hafiz Qasim and Yıldız, Mehmet and Kefal, Adnan (2022) "Experimental and numerical investigation on large deformation reconstruction of thin laminated composite structures using inverse finite element method", Thin-Walled Structures, Vol.178 (SCI)
Duman, Alp and Niazi, Soroush and Gharıb, Ghazaleh and Sadaghiani, Abdolali Khalili and Koşar, Ali (2022) "Self-assembled archaea bio-coatings in thermal-fluids systems: a study on adhesion optimization and energy efficiency", International Journal of Thermofluids, Vol.15 (NA)
Şükür, Emine Feyza and Elmas, Sinem and Seyednourani, Mahsa and Eskizeybek, Volkan and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2022) "A rational study on the hydrothermal aging of AFP manufactured CF/polyetherketoneketone composites with in situ consolidation supported by acoustic emission inspection", Journal of Applied Polymer Science, Vol.139, No.29 (SCI)
Ti, C. and McDaniel, J. G. and Liem, A. and Gress, H. and Ma, M. and Kyoung, S. and Svitelskiy, O. and Yanık, Cenk and Kaya, İsmet İnönü and Hanay, M. S. and González, M. and Ekinci, K. L. (2022) "Dynamics of NEMS resonators across dissipation limits", Applied Physics Letters, Vol.121, No.2 (SCI)
Ebrahimpour Ahmadi, Vahid and Khaksaran, Mohammad Hadi and Apak, Ahmet Muhtar and Apak, Alper and Parlak, Murat and Tastan, Umur and Kaya, İsmet İnönü and Sadaghiani, Abdolali Khalili and Koşar, Ali (2022) "Graphene-coated sintered porous copper surfaces for boiling heat transfer enhancement", Carbon Trends, Vol.8 (NA)
Ansari Hamedani, Ali and Ow-Yang, Cleva W. and Hayat Soytaş, Serap (2022) "Silicon nanocrystals-embedded carbon nanofibers from hybrid polyacrylonitrile – TEOS precursor as high-performance lithium-ion battery anodes", Journal of Alloys and Compounds, Vol.909 (SCI)
Ateş, Ayşenur and Parizad Benam, Behnam and Yağcı, Vedat and Çağlar Malyemez, Muhammed and Parlak, Murat and Sadaghiani, Abdolali Khalili and Koşar, Ali (2022) "On the effect of elliptical pin Fins, distribution pin Fins, and tip clearance on the performance of heat sinks in flow boiling", Applied Thermal Engineering, Vol.212 (SCI)
Saghatchi, Roozbeh and Yıldız, Mehmet and Doostmohammadi, Amin (2022) "Nematic order condensation and topological defects in inertial active nematics", Physical Review E, Vol.106, No.1 (SCI)
Şahin, Zeynep Munteha and Behroozi Kohlan, Taha and Ateşpare, Asu Ece and Yıldız, Mehmet and Ünal, Serkan and Dızman, Bekir (2022) "Polyoxazoline-modified graphene oxides with improved water and epoxy resin dispersibility and stability towards composite applications", Journal of Applied Polymer Science, Vol.139, No.25 (SCI)
Ali, Hafiz Qasim and Yilmaz, Çağatay and Yıldız, Mehmet (2022) "The effect of different tabbing methods on the damage progression and failure of carbon fiber reinforced composite material under tensile loading", Polymer Testing, Vol.111 (SCI)
Şimşek, Sevda and Ebrahimpour Ahmadi, Vahid and Çelik, Süleyman and Sayar, Ersin and Koşar, Ali (2022) "Fabrication and flow rate characterization of a DRIE process based valveless piezoelectric micropump", Journal of Micromechanics and Microengineering, Vol.32, No.6 (SCI)
Saeidiharzand, Shaghayegh and Sadaghiani, Abdolali Khalili and Koşar, Ali (2022) "Effect of membrane surface wetting on the performance of direct contact membrane distillation for seawater desalination", Cleaner Engineering and Technology, Vol.8 (NA)
Seyedmirzaei Sarraf, Seyedali and Rokhsar Talabazar, Farzad and Namlı, İlayda and Maleki, Mohammadamin and Sheibani Aghdam, Araz and Gharib, Ghazeleh and Grishenkov, Dmitry and Ghorbani, Morteza and Koşar, Ali (2022) "Fundamentals, biomedical applications and future potential of micro-scale cavitation-a review", Lab on a Chip, Vol.22, No.12, 2237-2258 (SCI)
Vasile, Bogdan Stefan and Nicoara, Adrian Ionut and Surdu, Vasile Adrian and Ene, Vladimir Lucian and Neacsu, Ionela Andreea and Stoica, Alexandra Elena and Oprea, Ovidiu and Boierasu, Iulian and Trusca, Roxana and Vrabec, Mirijam and Miklavic, Blaz and Sturm, Saso and Ow-Yang, Cleva W. and Gülgün, Mehmet Ali and Bundur, Zeynep Basaran (2022) "Fly-ash evaluation as potential EOL material replacement of cement in pastes: morpho-structural and physico-chemical properties assessment", Materials, Vol.15, No.9 (SCI)
Aboubakri, Akam and Akkus, Yigit and Sadaghiani, Abdolali Khalili and Sefiane, Khellil and Koşar, Ali (2022) "Computational and experimental investigations on the evaporation of single and multiple elongated droplets", Chemical Engineering Journal Advances, Vol.10 (NA)
Aboubakri, Akam and Sadaghiani, Abdolali Khalili and Akgönül, Sarp and Erdoğmuş, Abdullah Berkan and Baki, Murat and Can, Fatih and Şabanoviç, Asif and Koşar, Ali (2022) "Numerical and experimental investigation of the effect of micro restriction geometry on gas flows through a micro orifice", Fluids, Vol.7, No.5 (ESCI)
Celep, M. and Hadjadj, A. and Shadloo, M. S. and Sharma, S. and Yıldız, Mehmet and Kloker, M. J. (2022) "Effect of streak employing control of oblique-breakdown in a supersonic boundary layer with weak wall heating/cooling", Physical Review Fluids, Vol.7, No.5 (SCI)
Emami Tabrizi, Isa and Kefal, Adnan and Seyyed Monfared Zanjani, Jamal and Yıldız, Mehmet (2022) "Damage growth and failure detection in hybrid fiber composites using experimental in-situ optical strain measurements and smoothing element analysis", International Journal of Damage Mechanics, Vol.31, No.4, 479-507 (SCI)
Ergene, Arzu and Khabbazabkenar, Sirous and Deniz, Ece and Ow-Yang, Cleva W. (2022) "Borate polyanions tuning persistent luminescence in Eu and Dy co-doped strontium aluminate", Materials Advances, Vol.3, No.7, 3238-3250 (ESCI)
Kefal, Adnan and Diyaroğlu, Çağan and Yıldız, Mehmet and Oterkus, Erkan (2022) "Coupling of peridynamics and inverse finite element method for shape sensing and crack propagation monitoring of plate structures", Computer Methods in Applied Mechanics and Engineering, Vol.391 (SCI)
Ozbulut, M. and Olmez, O. and Kolukısa, Deniz Can and Deliktas-Ozdemir, E. and Goren, O. and Yıldız, Mehmet (2022) "An investigation into the nonlinear effects in the roll motion of 2-D bodies by SPH method", Ocean Engineering, Vol.248 (SCI)
Surtaev, Anton and Koşar, Ali and Serdyukov, Vladimir and Malakhov, Ivan (2022) "Boiling at subatmospheric pressures on hydrophobic surface: bubble dynamics and heat transfer", International Journal of Thermal Sciences, Vol.173 (SCI)
Altay, Rana and Yapıcı, Murat Kaya and Koşar, Ali (2022) "A hybrid spiral microfluidic platform coupled with surface acoustic waves for circulating tumor cell sorting and separation: a numerical study", Biosensors, Vol.12, No.3 (SCI)
Çaldağ, Hakan Osman and Demir, Ebru and Yeşilyurt, Serhat (2022) "A numerical and experimental investigation of rolling and sliding motion of rotating spheres inside a cylinder", Journal of Fluid Mechanics, Vol.935 (SCI)
Atılgan, Ali Rana and Atılgan, Canan (2022) "Computational strategies for protein conformational ensemble detection", Current Opinion in Structural Biology, Vol.72, 79-87 (SCI)
Burak Okan, Osman and Turgut, Deniz and Atılgan, Canan and Atılgan, Ali Rana and Ozisik, Rahmi (2022) "Could network structures generated with simple rules imposed on a cubic lattice reproduce the structural descriptors of globular proteins?", Journal of Complex Networks, Vol.10, No.1 (SCI)
Gharıb, Ghazaleh and Saeidiharzand, Shaghayegh and Sadaghiani, Abdolali Khalili and Koşar, Ali (2022) "Antifreeze proteins: a tale of evolution from origin to energy applications", Frontiers in Bioengineering and Biotechnology, Vol.9 (SCI)
Rahimi, Mohammad Naqib and Kolukısa, Deniz Can and Yıldız, Mehmet and Ozbulut, Murat and Kefal, Adnan (2022) "A generalized hybrid smoothed particle hydrodynamics-peridynamics algorithm with a novel Lagrangian mapping for solution and failure analysis of fluid-structure interaction problems", Computer Methods in Applied Mechanics and Engineering, Vol.389 (SCI)
Abbasiasl, Taher and Şutova, Hande Eda and Niazi, Soroush and Çelebi Torabfam, Gizem and Karavelioglu, Zeynep and Kirabali, Ufuk and Yilmaz, Abdurrahim and Uvet, Huseyin and Kutlu, Özlem and Ekici, Sinan and Ghorbani, Morteza and Koşar, Ali (2022) "A flexible cystoscope based on hydrodynamic cavitation for tumor tissue ablation", IEEE Transactions on Biomedical Engineering, Vol.69, No.1, 513-524 (SCI)
Parlak, Murat and Özsunar, Abuzer and Koşar, Ali (2022) "High aspect ratio microchannel heat sink optimization under thermally developing flow conditions based on minimum power consumption", Applied Thermal Engineering, Vol.201, No.Part A (SCI)
Arıkan, Muhammed Hasan and Eroğlu, Fatih and Eskizeybek, Volkan and Şükür, Emine Feyza and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2022) "A systematic characterization approach for vacuum bag only prepregs towards an accurate process design", Materials, Vol.15, No.2 (SCI)
Emami Tabrizi, Isa and Öz, Fatih Ertuğrul and Seyyed Monfared Zanjani, Jamal and Mandal, Sefa Kemal and Yıldız, Mehmet (2022) "Failure sequence determination in sandwich structures using concurrent acoustic emission monitoring and postmortem thermography", Mechanics of Materials, Vol.164 (SCI)
Manna, Madhu Sudan and Tamer, Yusuf Talha and Gaszek, Ilona and Poulides, Nicole and Ahmed, Ayesha and Wang, Xiaoyu and Toprak, Furkan C.R. and Woodard, Da Nae R. and Koh, Andrew Y. and Williams, Noelle S. and Borek, Dominika and Atılgan, Ali Rana and Hulleman, John D. and Atılgan, Canan and Tambar, Uttam and Toprak, Erdal (2021) "A trimethoprim derivative impedes antibiotic resistance evolution", Nature Communications, Vol.12, No.1 (SCI)
Işık, Murat and
Kısa, Erdal and
Koç, Bahattin and
Yıldız, Mehmet and Pehlivanoğulları, Barış and Orhangül, Akın and Akbulut, Güray (2021)
"Topology optimization and manufacturing of engine bracket using electron beam melting",
Journal of Additive Manufacturing Technologies, Vol.1, No.3 (NA)
Rokhsar Talabazar, Farzad and Jafarpour, Mohammad and Zuvin, Merve and Chen, Hongjian and Gevari, Moein Talebian and Villanueva, Luis Guillermo and Grishenkov, Dmitry and Koşar, Ali and Ghorbani, Morteza (2021) "Design and fabrication of a vigorous "cavitation-on-a-chip" device with a multiple microchannel configuration", Microsystems and Nanoengineering, Vol.7, No.1 (SCI)
Parizad Benam, Behnam and Sadaghiani, Abdolali Khalili and Yağcı, Vedat and Parlak, Murat and Sefiane, Khellil and Koşar, Ali (2021) "Review on high heat flux flow boiling of refrigerants and water for electronics cooling", International Journal of Heat and Mass Transfer, Vol.180 (SCI)
Abdollahzadeh, Mohammadamin and Tabrizi, Isa Emami and Kefal, Adnan and Yıldız, Mehmet (2021) "A combined experimental/numerical study on deformation sensing of sandwich structures through inverse analysis of pre-extrapolated strain measurements", Measurement: Journal of the International Measurement Confederation, Vol.185 (SCI)
De Sá Rodrigues, Francisco and Marques, Ricardo and Emami Tabrizi, Isa and Kefal, Adnan and Ali, Hafiz Qasim and Yıldız, Mehmet and Suleman, Afzal (2021) "A new methodology for thermoelastic model identification in composite materials using digital image correlation", Optics and Lasers in Engineering, Vol.146 (SCI)
Mohammadpour Chehrghani, Mirvahid and Abbasiasl, Taher and Sadaghiani, Abdolali Khalili and Koşar, Ali (2021) "Biphilic surfaces with optimum hydrophobic islands on a superhydrophobic background for dropwise flow condensation", Langmuir, Vol.37, No.46, 13567-13575 (SCI)
Abbasiasl, Taher and Mohammadpour Chehrghani, Mirvahid and Sadaghiani, Abdolali Khalili and Koşar, Ali (2021) "Gradient mixed wettability surfaces for enhancing heat transfer in dropwise flow condensation", International Journal of Heat and Mass Transfer, Vol.179 (SCI)
Aboubakri, Akam and Ebrahimpour Ahmadi, Vahid and Çelik, Süleyman and Sadaghiani, Abdolali Khalili and Sefiane, Khellil and Koşar, Ali (2021) "Effect of surface biphilicity on FC-72 flow boiling in a rectangular minichannel", Frontiers in Mechanical Engineering, Vol.7 (ESCI)
Seyednourani, Mahsa and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2021) "A two-stage optimization methodology for gate and vent locations and distribution media layout for liquid composite molding process", Composites Part A: Applied Science and Manufacturing, Vol.149 (SCI)
Saghatchi, Roozbeh and Özbulut, Murat and Yıldız, Mehmet (2021) "Dynamics of double emulsion interfaces under the combined effects of electric field and shear flow", Computational Mechanics, Vol.68, No.4, 775-793 (SCI)
Beylergil, Bertan and Emami Tabrizi, Isa and Zanjani, Jamal S.M. and Saeidiharzand, Shaghayegh and Haghighi Poudeh, Leila and Yıldız, Mehmet (2021) "Experimental failure analysis and mechanical performance evaluation of fiber-metal sandwich laminates interleaved with polyamide-6,6 interlayers through the combined usage of acoustic emission, thermography and microscopy techniques", Journal of Sandwich Structures and Materials, Vol.23, No.7, 3044-3080 (SCI)
Bilbey, Buse and Sezen, Meltem and Ow-Yang, Cleva W. and Çamiç, Büşra Tuğba and Buyukaksoy, Aligul (2021) "Formation, performance, and long-term stability of nanostructured Ni-YSZ thin film electrodes", ACS Applied Energy Materials, Vol.4, No.9, 9046-9056 (SCI)
Ti, Chaoyang and Ari, Atakan and Karakan, Çağatay and Yanık, Cenk and Kaya, İsmet İnönü and Hanay, Selim and Svitelskiy, Oleksiy and González, Miguel and Seren, Huseyin and Ekinci, Kamil (2021) "Frequency-dependent piezoresistive effect in top-down fabricated gold nanoresistors", Nano Letters, Vol.21, No.15, 6533-6539 (SCI)
Ansari Hamedani, Ali and Ow-Yang, Cleva W. and Hayat Soytaş, Serap (2021) "Mechanisms of Si nanoparticle formation by molten salt magnesiothermic reduction of silica for lithium-ion battery anodes", ChemElectroChem, Vol.8, No.16, 3181-3191 (SCI)
Khan, Raja Muhammad Awais and Saeidiharzand, Shaghayegh and Emami Tabrizi, Isa and Ali, Hafiz Qasim and Yıldız, Mehmet (2021) "A novel hybrid damage monitoring approach to understand the correlation between size effect and failure behavior of twill CFRP laminates", Composite Structures, Vol.270 (SCI)
Emami Tabrizi, Isa and Sharani, Baidaa and Seyyed Monfared Zanjani, Jamal and Yıldız, Mehmet (2021) "Using digital image correlation for in situ strain and damage monitoring in hybrid fiber laminates under in-plane shear loading", Polymer Composites, Vol.42, No.8, 4029-4042 (SCI)
Altay, Rana and Yetişgin, Abuzer Alp and Erdem, Kaan and Koşar, Ali (2021) "The effect of varying radius of curvature on mixing in elliptical spiral microchannels", Chemical Engineering and Processing - Process Intensification, Vol.164 (SCI)
Eren, Guncem Ozgun and Sadeghi, Sadra and Bahmani Jalali, Houman and Ritter, Maximilian and Han, Mertcan and Baylam, Isinsu and Melikov, Rustamzhon and Onal, Asim and Oz, Fatma and Sahin, Mehmet and
Ow-Yang, Cleva W. and Sennaroglu, Alphan and Lechner, Rainer and Nizamoglu, Sedat (2021)
"Cadmium-free and efficient type-II InP/ZnO/ZnS quantum dots and their application for LEDs",
ACS Applied Materials & Interfaces, Vol.13, No.27, 32022-32030 (SCI)
Keskin, Yasemin and Ünverdi, Özhan and Erbahar, Doğan and Kaya, İsmet İnönü and Çelebi, Cem (2021) "The role of charge distribution on the friction coefficients of epitaxial graphene grown on the Si-terminated and C-terminated faces of SiC", Carbon, Vol.178, 125-132 (SCI)
Kefal, Adnan and Emami Tabrizi, Isa and Yıldız, Mehmet and Tessler, Alexander (2021) "A smoothed iFEM approach for efficient shape-sensing applications: numerical and experimental validation on composite structures", Mechanical Systems and Signal Processing, Vol.152 (SCI)
Rahimi, Mohammad Naqib and Kefal, Adnan and Yıldız, Mehmet (2021) "An improved ordinary-state based peridynamic formulation for modeling FGMs with sharp interface transitions", International Journal of Mechanical Sciences, Vol.197 (SCI)
Bahmani Jalali, Houman and Sadeghi, Sadra and Baylam, Isinsu and Han, Mertcan and Ow-Yang, Cleva W. and Sennaroglu, Alphan and Nizamoglu, Sedat (2021) "Exciton recycling via InP quantum dot funnels for luminescent solar concentrators", Nano Research, Vol.14, No.5, 1488-1494 (SCI)
Niazi, Soroush and Sadaghiani, Abdolali Khalili and Gharıb, Ghazaleh and Kaya, Veysel Ogulcan and Çelik, Süleyman and Kutlu, Özlem and Koşar, Ali (2021) "Bio-coated surfaces with micro-roughness and micro-porosity: next generation coatings for enhanced energy efficiency", Energy, Vol.222 (SCI)
Jafarpour, Mohammad and
Sheibani Aghdam, Araz and
Talebian Gevari, Moein and
Koşar, Ali and
Bayazıt, Mustafa Kemal and
Ghorbani, Morteza (2021)
"An ecologically friendly process for graphene exfoliation based on the "hydrodynamic cavitation on a chip" concept",
RSC Advances, Vol.11, No.29, 17965-17975 (SCI)
Ebrahimpour Ahmadi, Vahid and Bütün, İsmail and Altay, Rana and Bazaz, Sajad Razavi and Alijani Alijanvand, Hossein and Çelik, Süleyman and Warkiani, Majid Ebrahimi and Koşar, Ali (2021) "The effects of baffle configuration and number on inertial mixing in a curved serpentine micromixer: experimental and numerical study", Chemical Engineering Research and Design, Vol.168, 490-498 (SCI)
Güçlü, Tandaç Fürkan and Atılgan, Ali Rana and Atılgan, Canan (2021) "Dynamic community composition unravels allosteric communication in pdz3", Journal of Physical Chemistry B, Vol.125, No.9, 2266-2276 (SCI)
Massarwa, Eyass and Emami Tabrizi, Isa and Yıldız, Mehmet (2021) "Mechanical behavior and failure of glass/carbon fiber hybrid composites: multiscale computational predictions validated by experiments", Composite Structures, Vol.260 (SCI)
Hosseinpour Shafaghi, Ali and Rokhsar Talabazar, Farzad and Zuvin, Merve and Talebian Gevari, Moein and Villanueva, Luis Guillermo and Ghorbani, Morteza and Koşar, Ali (2021) "On cavitation inception and cavitating flow patterns in a multi-orifice microfluidic device with a functional surface", Physics of Fluids, Vol.33, No.3 (SCI)
Kefal, Adnan and Emami Tabrizi, Isa and Tansan, Murat and Kısa, Erdal and Yıldız, Mehmet (2021) "An experimental implementation of inverse finite element method for real-time shape and strain sensing of composite and sandwich structures", Composite Structures, Vol.258 (SCI)
Yanık, Cenk and Sazgari Ardakani, Vahid and Canatar, Abdülkadir and Vaheb, Yaser and Kaya, İsmet İnönü (2021) "Strong localization in suspended monolayer graphene by intervalley scattering", Physical Review B, Vol.103, No.8 (SCI)
Mohammadpour Chehrghani, Mirvahid and Abbasiasl, Taher and Sadaghiani, Abdolali Khalili and Koşar, Ali (2021) "Copper-based superhydrophobic nanostructures for heat transfer in flow condensation", ACS Applied Nano Materials, Vol.4, No.2, 1719-1732 (SCI)
Tofighi, N. and Feng, J. J. and Yıldız, Mehmet and Suleman, A. (2021) "Long term sedimentation of an elliptic disc subject to an electrostatic field using smoothed particle hydrodynamics method", International Journal of Multiphase Flow, Vol.135 (SCI)
Güçlü, Tandaç Fürkan and Kocatuğ, Nazlı and Atılgan, Ali Rana and Atılgan, Canan (2021) "N-terminus of the third PDZ domain of PSD-95 orchestrates allosteric communication for selective ligand binding", Journal of Chemical Information and Modeling, Vol.61, No.1, 347-357 (SCI)
Talebian Gevari, Moein and Aydemir, Gizem and Gharıb, Ghazaleh and Kutlu, Özlem and Uvet, Huseyin and Ghorbani, Morteza and Koşar, Ali (2021) "Local carpet bombardment of immobilized cancer cells with hydrodynamic cavitation", IEEE Access, Vol.9, 14983-14991 (SCI)
Alexiadis, Alessio and Albano, Andrea and Rahmat, Amin and
Yıldız, Mehmet and
Kefal, Adnan and Özbulut, Murat and Bakırcı, Nadi and Garzon Alvarado, Diego Alexander and Duque-Daza, Carlos Alberto and Eslava-Schmalbach, Javier Hernando (2021)
"Simulation of pandemics in real cities: enhanced and accurate digital laboratories",
Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol.477, No.2245 (SCI)
Karatum, Onuralp and Eren, Guncem Ozgun and Melikov, Rustamzhon and Onal, Asim and
Ow-Yang, Cleva W. and Sahin, Mehmet and Nizamoglu, Sedat (2021)
"Quantum dot and electron acceptor nano-heterojunction for photo-induced capacitive charge-transfer",
Scientific Reports, Vol.11, No.1 (SCI)
Rizvandi, Omid Babaie and Eskin, Murat Gökhan and Yeşilyurt, Serhat (2021) "Numerical modeling of anode-bleeding PEM fuel cells: effects of operating conditions and flow field design", International Journal of Hydrogen Energy (SI), Vol.46, No.5, 4378-4398 (SCI)
Almasi, F. and Shadloo, M. S. and Hadjadj, A. and Özbulut, M. and Tofighi, Nima and Yıldız, Mehmet (2021) "Numerical simulations of multi-phase electro-hydrodynamics flows using a simple incompressible smoothed particle hydrodynamics method", Computers and Mathematics with Applications (SI), Vol.81, 772-785 (SCI)
Haghighi Poudeh, Leila and Berktaş, İlayda and Ali, Hafiz Qasim and Saner Okan, Burcu and Yıldız, Mehmet (2020) "Toward next-generation carbon-based materials derived from waste and biomass for high-performance energy applications", Energy Technology, Vol.8, No.12 (SCI)
Sohouli, Abdol Rasoul and Kefal, Adnan and Abdelhamid, Ahmed and Yıldız, Mehmet and Suleman, Afzal (2020) "Continuous density-based topology optimization of cracked structures using peridynamics", Structural and Multidisciplinary Optimization, Vol.62, No.5, 2375-2389 (SCI)
Talebian Gevari, Moein and Niazi, Soroush and Karimzadehkhouei, Mehrdad and Şendur, Kürşat and Menguc, M. Pinar and Ghorbani, Morteza and Koşar, Ali (2020) "Deagglomeration of nanoparticle clusters in a "cavitation on chip" device", AIP Advances, Vol.10, No.11 (SCI)
Cavuslar, Ozge and Nakay, Emre and Kazakoglu, Umut and Khabbazabkenar, Sirous and Ow-Yang, Cleva W. and Acar, Havva Yagci (2020) "Synthesis of stable gold nanoparticles using linear polyethyleneimines and catalysis of both anionic and cationic azo dye degradation", Materials Advances, Vol.1, No.7, 2407-2417 (ESCI)
Khan, Raja Muhammad Awais and Emami Tabrizi, Isa and Ali, Hafiz Qasim and Demir, Eralp and Yıldız, Mehmet (2020) "Investigation on interlaminar delamination tendency of multidirectional carbon fiber composites", Polymer Testing, Vol.90 (SCI)
Sharani, Baidaa and Emami Tabrizi, Isa and Seyyed Monfared Zanjani, Jamal and Rahimi, Mohammad Naqib and Haghighi Poudeh, Leila and Kefal, Adnan and Yıldız, Mehmet (2020) "Damage mechanisms in CFRP/HNT laminates under flexural and in-plane shear loadings using experimental and numerical methods", Composites Part A: Applied Science and Manufacturing, Vol.136 (SCI)
Rahimi, Mohammad Naqib and Kefal, Adnan and Yıldız, Mehmet and Öterkuş, Erkan (2020) "An ordinary state-based peridynamic model for toughness enhancement of brittle materials through drilling stop-holes", International Journal of Mechanical Sciences, Vol.182 (SCI)
Kolukısa, Deniz Can and Özbulut, Murat and Peşman, Emre and Yıldız, Mehmet (2020) "Development of computationally efficient augmented Lagrangian SPH for incompressible flows and its quantitative comparison with WCSPH simulating flow past a circular cylinder", International Journal for Numerical Methods in Engineering, Vol.121, No.18, 4187-4207 (SCI)
Sadaghiani, Abdolali Khalili and Rajabnia, Hossein and Çelik, Süleyman and Noh, H. and Kwak, H. J. and Nejatpour, Mona and Park, Hyun Sun and Acar, H. Y. and Mısırlıoğlu, Burç and Özdemir, Mehmed Rafet and Koşar, Ali (2020) "Pool boiling heat transfer of ferrofluids on structured hydrophilic and hydrophobic surfaces: the effect of magnetic field", International Journal of Thermal Sciences, Vol.155 (SCI)
Khabbazabkenar, Sirous and Kocjan, Andraž and Samardžija, Zoran and Fanetti, Mattia and Ergene, Arzu and Šturm, Sašo and Sezen, Meltem and Ow-Yang, Cleva W. (2020) "Effect of sintering and boron content on rare earth dopant distribution in long afterglow strontium aluminate", Journal of the European Ceramic Society, Vol.40, No.12, 4129-4139 (SCI)
Çaldağ, Hakan Osman and Yeşilyurt, Serhat (2020) "Acoustic radiation forces on magnetically actuated helical swimmers", Physics of Fluids, Vol.32, No.9 (SCI)
Aboubakri, Akam and Ebrahimpour Ahmadi, Vahid and Koşar, Ali (2020) "Modeling of a passive-valve piezoelectric micro-pump: a parametric study", Micromachines, Vol.11, No.8 (SCI)
Mahdikhah, V. and Ataie, A. and Babaei, A. and Sheibani, S. and Ow-Yang, Cleva W. and Khabbazabkenar, Sirous (2020) "CoFe2O4/Fe magnetic nanocomposite: exchange coupling behavior and microwave absorbing property", Ceramics International, Vol.46, No.11, 17903-17916 (SCI)
Ijaz, Aatif and Yağcı, M. Barış and Ow-Yang, Cleva W. and Demirel, A. Levent and Miko, Annamaria (2020) "Formation of mesoporous silica particles with hierarchical morphology", Microporous and Mesoporous Materials, Vol.303 (SCI)
Hosseinpour Shafaghi, Ali and Rokhsar Talabazar, Farzad and Koşar, Ali and Ghorbani, Morteza (2020) "On the effect of the respiratory droplet generation condition on COVID-19 transmission", Fluids, Vol.5, No.3 (ESCI)
Jalalypour, Farzaneh and Sensoy, Ozge and Atılgan, Canan (2020) "Perturb-scan-pull: a novel method facilitating conformational transitions in proteins", Journal of Chemical Theory and Computation, Vol.16, No.6, 3825-3841 (SCI)
Piepoli, Sofia and Alt, Aaron Oliver and Atılgan, Canan and Mancini, Erika Jazmin and Erman, Batu (2020) "Structural analysis of the PATZ1 BTB domain homodimer", Acta Crystallographica Section D: Structural Biology, Vol.76, 581-593 (SCI, CPCI-S)
Bilal, Diyar Khalis and Ünel, Mustafa and Yıldız, Mehmet and Koç, Bahattin (2020) "Realtime localization and estimation of loads on aircraft wings from depth images", Sensors, Vol.20, No.12 (SCI)
Talebian Gevari, Moein and Abbasiasl, Taher and Niazi, Soroush and Ghorbani, Morteza and Koşar, Ali (2020) "Direct and indirect thermal applications of hydrodynamic and acoustic cavitation: a review", Applied Thermal Engineering, Vol.171 (SCI)
Mohammadi, Ali and Koşar, Ali (2020) "The effect of arrangement type and pitch ratio on the performance of micro-pin-fin heat sinks", Journal of Thermal Analysis and Calorimetry, Vol.140, No.3, 1057-1068 (SCI)
Yetişgin, Abuzer Alp and Çetinel, Sibel and Zuvin, Merve and Koşar, Ali and Kutlu, Özlem (2020) "Therapeutic nanoparticles and their targeted delivery applications", Molecules, Vol.25, No.9 (SCI)
Özbulut, Murat and Ramezanzadeh, Shayan and Yıldız, Mehmet and Gören, Ömer (2020) "Modelling of wave generation in a numerical tank by SPH method", Journal of Ocean Engineering and Marine Energy, Vol.6, No.2, 121-136 (ESCI)
Erdem, Kaan and Ebrahimpour Ahmadi, Vahid and Koşar, Ali and Kuddusi, Lutfullah (2020) "Differential sorting of microparticles using spiral microchannels with elliptic configurations", Micromachines, Vol.11, No.4 (SCI)
Nicoara, Adrian Ionut and Stoica, Alexandra Elena and Vrabec, Mirijam and Smuc Rogan, Nastja and Sturm, Saso and Ow-Yang, Cleva W. and Gülgün, Mehmet Ali and Basaran Bundur, Zeynep and Ciuca, Ion and Vasile, Bogdan Stefan (2020) "End-of-life materials used as supplementary cementitious materials in the concrete industry", Materials, Vol.13, No.8 (SCI)
Sazgari Ardakani, Vahid and Sullivan, Gerard and Kaya, İsmet İnönü (2020) "Interaction-induced crossover between weak antilocalization and weak localization in a disordered InAs/GaSb double quantum well", Physical Review B, Vol.101, No.15 (SCI)
Keçebaş, Muhammed Ali and Mengüç, M. Pınar and Koşar, Ali and Şendur, Kürşat (2020) "Spectrally selective filter design for passive radiative cooling", Journal of the Optical Society of America B, Vol.37, No.4, 1173-1182 (SCI)
Yılmaz, Çağatay and Topal, Serra and Ali, Hafiz Qasim and Tabrizi, Isa Emami and Al-Nadhari, Abdulrahman Saeed Abdulqader and Suleman, Afzal and Yıldız, Mehmet (2020) "Non-destructive determination of the stiffness matrix of a laminated composite structure with lamb wave", Composite Structures, Vol.237 (SCI)
Talebian Gevari, Moein and Parlar, Ayhan and Torabfam, Milad and Koşar, Ali and Yüce, Meral and Ghorbani, Morteza (2020) "Influence of fluid properties on intensity of hydrodynamic cavitation and deactivation of salmonella typhimurium", Processes, Vol.8, No.3 (SCI)
Altay, Rana and Sadaghiani, Abdolali Khalili and Sevgen, İlker and Şişman, Alper and Koşar, Ali (2020) "Numerical and experimental studies on the effect of surface roughness and ultrasonic frequency on bubble dynamics in acoustic cavitation", Energies, Vol.13, No.5 (SCI, CPCI-S)
Afghah, Seyedeh Ferdows and Ullah, Mohib and Zanjani, Jamal Seyyed Monfared and Süt, Pınar Akkuş and Şen, Özlem and Emanet, Melis and Saner Okan, Burcu and Çulha, Mustafa and Menceloğlu, Yusuf Z. and Yıldız, Mehmet and Koç, Bahattin (2020) "3D printing of silver-doped polycaprolactone-poly(propylene succinate) composite scaffolds for skin tissue engineering", Biomedical Materials, Vol.15, No.3 (SCI)
Abbasiasl, Taher and Niazi, Soroush and Sheibani Aghdam, Araz and Chen, Hongjian and Cebeci, Fevzi Çakmak and Ghorbani, Morteza and Grishenkov, Dmitry and Koşar, Ali (2020) "Effect of intensified cavitation using poly(vinyl alcohol) microbubbles on spray atomization characteristics in microscale", AIP Advances, Vol.10, No.2 (SCI)
Sadaghiani, Abdolali Khalili and Altay, Rana and Noh, H. and Kwak, H. J. and Şendur, Kürşat and Mısırlıoğlu, Burç and Park, H. S. and Koşar, Ali (2020) "Effects of bubble coalescence on pool boiling heat transfer and critical heat flux - a parametric study based on artificial cavity geometry and surface wettability", International Journal of Heat and Mass Transfer, Vol.147 (SCI)
Ghorbani, Morteza and Sheibani Aghdam, Araz and Talebian Gevari, Moein and Koşar, Ali and Cebeci, Fevzi Çakmak and Grishenkov, Dmitry and Svagan, Anna J. (2020) "Facile hydrodynamic cavitation on chip via cellulose nanofibers stabilized perfluorodroplets inside layer-by-layer assembled slips surfaces", Chemical Engineering Journal, Vol.382 (SCI)
Seviniş Özbulut, Emine Billur and Seven, Merve Senem and Bilge, Kaan and Akkaş Mohammadmoradi, Tuğçe and Taş, Cüneyt Erdinç and Yıldız, Burçin and Atılgan, Canan and Menceloğlu, Yusuf Z. and Ünal, Serkan (2020) "Blends of highly branched and linear poly(arylene ether sulfone)s: multiscale effect of the degree of branching on the morphology and mechanical properties", Polymer, Vol.188 (SCI)
Talebian Gevari, Moein and Hosseinpour Shafaghi, Ali and Villanueva, Guillermo and Ghorbani, Morteza and Koşar, Ali (2020) "Engineered lateral roughness element implementation and working fluid alteration to intensify hydrodynamic cavitating flows on a chip for energy harvesting", Micromachines, Vol.11, No.1 (SCI)
Akkaş Mohammadmoradi, Tuğçe and Zakharyuta, Anastasia and Taralp, Alpay and Ow-Yang, Cleva W. (2020) "Cross-linked enzyme lyophilisates (CLELs) of urease: a new method to immobilize ureases", Enzyme and Microbial Technology, Vol.132 (SCI)
Roch, Tomas and Simurka, Lukas and Ow-Yang, Cleva W. and Sezen, Meltem and Satrapinskyy, Leonid and Türütoğlu, Tuncay (2020) "Periodic density fluctuations in sputtered aluminum-doped silicon oxynitride layers", International Journal of Applied Glass Science, Vol.11, No.1, 207-214 (SCI)
Demircan, Özgür and Yılmaz, Çağatay and Kocaman, Esat Selim and Yıldız, Mehmet (2020) "An experimental study on tensile and bending properties of biaxial warp knitted textile composites", Advanced Composite Materials, Vol.29, No.1, 73-88 (SCI)
Ali, Hafiz Qasim and Emami Tabrizi, Isa and Khan, Raja Muhammad Awais and Tufani, Ali and Yıldız, Mehmet (2019) "Microscopic analysis of failure in woven carbon fabric laminates coupled with digital image correlation and acoustic emission", Composite Structures, Vol.230 (SCI)
Aydemir, Gizem and Koşar, Ali and Uvet, Hüseyin (2019) "Design and implementation of a passive micro flow sensor based on diamagnetic levitation", Sensors and Actuators A: Physical, Vol.300 (SCI)
Alijani Alijanvand, Hossein and Özbey, Arzu and Karimzadehkhouei, Mehrdad and Koşar, Ali (2019) "Inertial micromixing in curved serpentine micromixers with different curve angles", Fluids, Vol.4, No.4 (ESCI)
Eksioğlu, Aycan and Colakerol Arslan, Leyla and Sezen, Meltem and Ow-Yang, Cleva W. and Büyükaksoy, Aligül (2019) "Formation of nanocomposite solid oxide fuel cell cathodes by preferential clustering of cations from a single polymeric precursor", ACS Applied Materials & Interfaces, Vol.11, No.51, 47904-47916 (SCI)
Emami Tabrizi, Isa and Khan, Raja Muhammad Awais and Massarwa, Eyass and Seyyed Monfared Zanjani, Jamal and Ali, Hafiz Qasim and Demir, Eralp and Yıldız, Mehmet (2019) "Determining tab material for tensile test of CFRP laminates with combined usage of digital image correlation and acoustic emission techniques", Composites Part A: Applied Science and Manufacturing, Vol.127 (SCI)
Mahdikhah, V. and Ataie, A. and Babaei, A. and Sheibani, S. and Ow-Yang, Cleva W. and Khabbazabkenar, Sirous (2019) "Control of structural and magnetic characteristics of cobalt ferrite by post-calcination mechanical milling", Journal of Physics and Chemistry of Solids, Vol.134, 286-294 (SCI)
İnan Akmehmet, Güliz and Šturm, Sašo and Komelj, Matej and Samardžija, Zoran and Ambrožič, Bojan and Sezen, Meltem and Čeh, Miran and Ow-Yang, Cleva W. (2019) "Origin of long afterglow in strontium aluminate phosphors: atomic scale imaging of rare earth dopant clustering", Ceramics International, Vol.45, No.16, 20073-20077 (SCI)
Babaie Rizvandi, Omid and Yeşilyurt, Serhat (2019) "A transient Pseudo-3D model of the PEM fuel cell for the analysis of dead-ended anode and anode bleeding operation modes", Electrochimica Acta, Vol.324 (SCI)
Tofighi, Nima and Özbulut, Murat and Suleman, A. and Feng, J. J. and Yıldız, Mehmet (2019) "Dielectrophoretic interaction of circular particles in a uniform electric field", European Journal of Mechanics - B/Fluids, Vol.78, 194-202 (SCI)
Kefal, Adnan and Sohouli, Abdolrasoul and Öterkuş, Erkan and Yıldız, Mehmet and Suleman, Afzal (2019) "Topology optimization of cracked structures using peridynamics", Continuum Mechanics and Thermodynamics (SI), Vol.31, No.6, 1645-1672 (SCI)
Talebian Gevari, Moein and Ghorbani, Morteza and Svagan, Anna J. and Grishenkov, Dmitry and Koşar, Ali (2019) "Energy harvesting with micro scale hydrodynamic cavitation-thermoelectric generation coupling", AIP Advances, Vol.9, No.10 (SCI)
Ghorbani, Morteza and Deprem, Gökberk and Özdemir, Ece and Motezakker, Ahmad Reza and Villanueva, L. Guillermo and Koşar, Ali (2019) "On "cavitation on chip" in microfluidic devices with surface and sidewall roughness elements", Journal of Microelectromechanical Systems, Vol.28, No.5, 890-899 (SCI)
Çaldağ, Hakan Osman and Yeşilyurt, Serhat (2019) "Trajectories of magnetically-actuated helical swimmers in cylindrical channels at low Reynolds numbers", Journal of Fluids and Structures, Vol.90, 164-176 (SCI)
Shafighfard, Torkan and Demir, Eralp and Yıldız, Mehmet (2019) "Design of fiber-reinforced variable-stiffness composites for different open-hole geometries with fiber continuity and curvature constraints", Composite Structures, Vol.226 (SCI)
Ali, Hafiz Qasim and Emami Tabrizi, Isa and Khan, Raja Muhammad Awais and Seyyed Monfared Zanjani, Jamal and Yılmaz, Çağatay and Haghighi Poudeh, Leila and Yıldız, Mehmet (2019) "Experimental study on dynamic behavior of woven carbon fabric laminates using in-house piezoelectric sensors", Smart Materials and Structures, Vol.28, No.10 (SCI)
Babaie Rizvandi, Omid and Yeşilyurt, Serhat (2019) "Modeling and performance analysis of branched microfluidic fuel cells with high utilization", Electrochimica Acta, Vol.318, 169-180 (SCI)
Emami Tabrizi, Isa and Kefal, Adnan and Seyyed Monfared Zanjani, Jamal and Akalın, Çağdaş and Yıldız, Mehmet (2019) "Experimental and numerical investigation on fracture behavior of glass/carbon fiber hybrid composites using acoustic emission method and refined zigzag theory", Composite Structures, Vol.223 (SCI)
Rastani, Sina and Yüksel, Tuğçe and Çatay, Bülent (2019) "Effects of ambient temperature on the route planning of electric freight vehicles", Transportation Research Part D: Transport and Environment, Vol.74, 124-141 (SCI, SSCI)
Sheibani Aghdam, Araz and Ghorbani, Morteza and Deprem, Gökberk and Cebeci, Fevzi Çakmak and Koşar, Ali (2019) "A new method for intense cavitation bubble generation on layer-by-layer assembled slips", Scientific Reports, Vol.9, No.1 (SCI)
Zuvin, Merve and Koçak, Muhammed and Ünal, Özlem and Akkoç, Yunus and Kutlu, Özlem and Yağcı Acar, Havva and Gözüaçık, Devrim and Koşar, Ali (2019) "Nanoparticle based induction heating at low magnitudes of magnetic field strengths for breast cancer therapy", Journal of Magnetism and Magnetic Materials, Vol.483, 169-177 (SCI)
Pehlivan, Zeki Semih and Torabfam, Milad and Kurt, Hasan and Ow-Yang, Cleva W. and Hildebrandt, Niko and Yüce, Meral (2019) "Aptamer and nanomaterial based FRET biosensors: a review on recent advances (2014-2019)", Microchimica Acta, Vol.186, No.8 (SCI)
Tamer, Yusuf Talha and Gazsek, Ilona K. and
Abdizadeh, Haleh and Batur, Tuğçe and Reynolds, Kimberly and
Atılgan, Ali Rana and
Atılgan, Canan and Toprak, Erdal (2019)
"High-order epistasis in catalytic power of dihydrofolate reductase gives rise to a rugged fitness landscape in the presence of trimethoprim selection",
Molecular Biology and Evolution, Vol.36, No.7, 1533-1550 (SCI)
Kasap, Sibel and Kaya, İsmet İnönü and Repp, Sergej and Erdem, Emre (2019) "Superbat: battery-like supercapacitor utilized by graphene foam and zinc
oxide (ZnO) electrodes induced by structural defects", Nanoscale Advances, Vol.1, No.7, 2586-2597 (SCI)
Sazgari Ardakani, Vahid and Sullivan, Gerard and Kaya, İsmet İnönü (2019) "Localization of trivial edge states in InAs/GaSb composite quantum wells", Physical Review B, Vol.100, No.4 (SCI)
Zuvin, Merve and Kuruoğlu, Efe and Kaya, Veysel Oğulcan and Ünal, Özlem and Kutlu, Özlem and Yağcı Acar, Havva and Gözüaçık, Devrim and Koşar, Ali (2019) "Magnetofection of green fluorescent protein encoding DNA-bearing polyethyleneimine-coated superparamagnetic iron oxide nanoparticles to human breast cancer cells", ACS Omega, Vol.4, No.7, 12366-12374 (SCI)
Bahmani Jalali, Houman and Sadeghi, Sadra and Şahin, Mehmet and Öztürk, Hande and Ow-Yang, Cleva W. and Nizamoğlu, Sedat (2019) "Colloidal aluminum antimonide quantum dots", Chemistry of Materials, Vol.31, No.13, 4743-4747 (SCI)
Haghighi Poudeh, Leila and Letofsky-Papst, Ilse and Cebeci, Fevzi Çakmak and Menceloğlu, Yusuf Z. and Yıldız, Mehmet and Saner Okan, Burcu (2019) "Facile synthesis of single- and multi-layer graphene/Mn3O4 integrated 3D urchin-shaped hybrid composite electrodes by core-shell electrospinning", ChemNanoMat, Vol.5, No.6, 792-801 (SCI)
Khaksaran, Mohammad Hadi and Kaya, İsmet İnönü (2019) "On the dynamics of intrinsic carbon in copper during the annealing phase of chemical vapor deposition growth of graphene", ACS Omega, Vol.4, No.6, 9629-9635 (SCI)
Karimzadehkhouei, Mehrdad and Khalili Sadaghiani, Abdolali and Motezakker, Ahmad Reza and Akgönül, Sarp and Özbey, Arzu and Şendur, Kürşat and Mengüç, M. Pınar and Koşar, Ali (2019) "Experimental and numerical investigation of inlet temperature effect on convective heat transfer of gamma-Al2O3/water nanofluid flows in microtubes", Heat Transfer Engineering, Vol.40, No.9-10, 738-752 (SCI)
Motezakker, Ahmad Reza and Khalili Sadaghiani, Abdolali and Çelik, Süleyman and Larsen, Tom and Villanueva, Luis Guillermo and Koşar, Ali (2019) "Optimum ratio of hydrophobic to hydrophilic areas of biphilic surfaces in thermal fluid systems involving boiling", International Journal of Heat and Mass Transfer, Vol.135, 164-174 (SCI)
Kefal, Adnan and Haşim, Kazım Ahmet and Yıldız, Mehmet (2019) "A novel isogeometric beam element based on mixed form of refined zigzag theory for thick sandwich and multilayered composite beams", Composites Part B: Engineering, Vol.167, 100-121 (SCI)
Demir, Eralp and Yousefi Louyeh, Pouya and Yıldız, Mehmet (2019) "Design of variable stiffness composite structures using lamination parameters with fiber steering constraint", Composites Part B: Engineering, Vol.165, 733-746 (SCI)
Seven, Merve Senem and Oğuz, Oğuzhan and Menceloğlu, Yusuf Z. and Atılgan, Canan (2019) "Tuning interaction parameters of thermoplastic polyurethanes in a binary solvent to achieve precise control over microphase separation", Journal of Chemical Information and Modeling (SI), Vol.59, No.5, 1946-1956 (SCI)
Fatehi, R. and Rahmat, Amin and Tofighi, N. and Yıldız, Mehmet and Shadloo, M. S. (2019) "Density-based smoothed particle hydrodynamics methods for incompressible flows", Computers and Fluids, Vol.185, 22-33 (SCI)
Karimzadehkhouei, Mehrdad and Özbey, Arzu and MacKenzie-Dover, C. and Christy, John R. E. and Sefiane, Khellil and Koşar, Ali (2019) "Investigation of single air bubble dynamics and the effect of nanoparticles in rectangular minichannels", Journal of Molecular Liquids, Vol.279, 510-517 (SCI)
Bülbül, Gonca and Liu, Gökşin and Vithalapur, Namrata Rao and Atılgan, Canan and Sayers, Zehra and Pourmand, Nader (2019) "Employment of iron-binding protein from Haemophilus influenzae in functional nanopipettes for iron monitoring", ACS Chemical Neuroscience (SI), Vol.10, No.4, 1970-1977 (SCI)
Babaie Rizvandi, Omid and Yeşilyurt, Serhat (2019) "A pseudo three-dimensional, two-phase, non-isothermal model of proton exchange membrane fuel cell", Electrochimica Acta, Vol.302, 180-197 (SCI)
Eskin, Murat Gökhan and Yeşilyurt, Serhat (2019) "Anode bleeding experiments to improve the performance and durability of proton exchange membrane fuel cells", International Journal of Hydrogen Energy, Vol.44, No.21, 11047-11056 (SCI)
Özbey, Arzu and
Karimzadehkhouei, Mehrdad and
Kocatürk, Nur Mehpare and
Erbil Bilir, Seçil and
Kutlu, Özlem and
Gözüaçık, Devrim and
Koşar, Ali (2019)
"Inertial focusing of cancer cell lines in curvilinear microchannels",
Micro and Nano Engineering, Vol.2, 53-63 (ESCI)
Özbey, Arzu and Karimzadehkhouei, Mehrdad and Sefiane, Khellil and Koşar, Ali and Christy, John R. E. (2019) "On bubble dynamics in subcooled nucleate boiling on a platinum wire", International Journal of Thermal Sciences, Vol.137, 1-12 (SCI)
Marques, Ricardo and Ünel, Mustafa and Yıldız, Mehmet and Suleman, Afzal (2019) "Remaining useful life prediction of laminated composite materials using thermoelastic stress analysis", Composite Structures, Vol.210, 381-390 (SCI)
Sezen, Meltem and Ow-Yang, Cleva W. and Karahan, Özlem and Kıtıki, Burak (2018) "Micro and nanostructural analysis of a human tooth using correlated focused ion beam (FIB) and transmission Electron microscopy (TEM) investigations", Micron, Vol.115, 17-24 (SCI)
Ross, Caroline and Nizami, Bilal and Glenister, Michael and Amamuddy, Olivier Sheik and Atılgan, Ali Rana and Atılgan, Canan and Bishop, Özlem Tastan (2018) "MODE-TASK: large-scale protein motion tools", Bioinformatics, Vol.34, No.21, 3759-3763 (SCI)
Sohouli, A. and Yıldız, Mehmet and Suleman, Afzal (2018) "Cost analysis of variable stiffness composite structures with application to a wind turbine blade", Composite Structures, Vol.203, 681-695 (SCI)
Khaksaran, Mohammad Hadi and Kaya, İsmet İnönü (2018) "Spontaneous nucleation and growth of graphene flakes on copper foil in the absence of external carbon precursor in chemical vapor deposition", ACS Omega, Vol.3, No.10, 12575-12583 (SCI)
Ghorbani, Morteza and Chen, Hongjian and Villanueva, Luis Guillermo and Grishenkov, Dmitry and Koşar, Ali (2018) "Intensifying cavitating flows in microfluidic devices with poly(vinyl alcohol) (PVA) microbubbles", Physics of Fluids, Vol.30, No.10 (SCI)
Kasap, Sibel and Kaya, İsmet İnönü (2018) "γ-Fe2O3 nanoparçacık katkılı üç boyutlu grafen köpüklerin üretimi ve karakterizasyonu", Dokuz Eylül Üniversitesi Mühendislik Fakültesi - Fen ve Mühendislik Dergisi, Vol.20, No.60, 743-754 (NA)
Özbey, Arzu and Karimzadehkhouei, Mehrdad and Alijani Alijanvand, Hossein and Koşar, Ali (2018) "Microparticle inertial focusing in an asymmetric curved microchannel", Fluids, Vol.3, No.3 (ESCI)
Rahmat, Amin and Tofighi, Nima and Yıldız, Mehmet (2018) "A numerical study of Rayleigh-Taylor instability for various Atwood numbers using ISPH method", Progress in Computational Fluid Dynamics, Vol.18, No.5, 267-276 (SCI)
Seyyed Monfared Zanjani, Jamal and Al-Nadhari, Abdulrahman Saeed Abdulqader and Yıldız, Mehmet (2018) "Manufacturing of electroactive morphing carbon fiber/glass fiber/epoxy composite: process and structural monitoring by FBG sensors", Thin-Walled Structures, Vol.130, 458-466 (SCI)
Yılmaz, Çağatay and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2018) "Semi-intrinsic self-healing performance of liquid-cored microcapsules in epoxy matrix", Advances in Polymer Technology, Vol.37, No.5, 1435-1443 (SCI)
Bahmani Jalali, Houman and Aria, Mohammad Mohammadi and Dikbaş, Uğur Meriç and Sadeghi, Sadra and Kumar, Baskaran Ganesh and Şahin, Mehmet and Kavaklı, İbrahim Halil and Ow-Yang, Cleva W. and Nizamoğlu, Sedat (2018) "Effective neural photostimulation using indium-based type-II quantum dots", Acs Nano, Vol.12, No.8, 8104-8114 (SCI)
Kumar, Baskaran Ganesh and Sadeghi, Sadra and Melikov, Rustamzhon and Mohammadi Aria, Mohammad and Bahmani Jalali, Houman and Ow-Yang, Cleva W. and Nizamoğlu, Sedat (2018) "Structural control of InP/ZnS core/shell quantum dots enables high-quality white LEDs", Nanotechnology, Vol.29, No.34 (SCI)
Mehrtash, Mehdi and Tari, İlker and Yeşilyurt, Serhat (2018) "Numerical modeling of visco-elasto-plastic hygro-thermal stresses and the effects of operating conditions on the mechanical degradation of PEFC membranes", Journal of Power Sources, Vol.396, 164-174 (SCI)
Rahmat, Amin and Yıldız, Mehmet (2018) "A multiphase ISPH method for simulation of droplet coalescence and electro-coalescence", International Journal of Multiphase Flow, Vol.105, 32-44 (SCI)
Ghorbani, Morteza and Khalili Sadaghiani, Abdolali and Villanueva, L. Guillermo and Koşar, Ali (2018) "Hydrodynamic cavitation in microfluidic devices with roughened surfaces", Journal of Micromechanics and Microengineering, Vol.28, No.7 (SCI)
Özdemir, Mehmed Rafet and Sadaghiani, Abdolali Khalili and Motezakker, Ahmad Reza and Parapari, Sorour Semsari and Park, Hyun Sun and Acar, Havva Yağcı and Koşar, Ali (2018) "Experimental studies on ferrofluid pool boiling in the presence of external magnetic force", Applied Thermal Engineering, Vol.139, 598-608 (SCI)
Mohammadi, Ali and Koşar, Ali (2018) "Review on heat and fluid flow in micro pin fin heat sinks under single-phase and two-phase flow conditions", Nanoscale and Microscale Thermophysical Engineering, Vol.22, No.3, 153-197 (SCI)
Dayan, Cem Balda and Afghah, Seyedeh Ferdows and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Çulha, Mustafa and Koç, Bahattin (2018) "Modeling 3D melt electrospinning writing by response surface methodology", Materials & Design, Vol.148, 87-95 (SCI)
Özbey, Arzu and Karimzadehkhouei, Mehrdad and Bayrak, Özgecan and Koşar, Ali (2018) "Inertial focusing of microparticles in curvilinear microchannels with different curvature angles", Microfluidics and Nanofluidics, Vol.22, No.6 (SCI)
Taheri, M. H. and Mohammadpourfard, Mousa and Khalili Sadaghiani, Abdolali and Koşar, Ali (2018) "Wettability alterations and magnetic field effects on the nucleation of magnetic nanofluids: a molecular dynamics simulation", Journal of Molecular Liquids, Vol.260, 209-220 (SCI)
Yüce, Meral and Kurt, Hasan and Hussain, Babar and Ow-Yang, Cleva W. and Budak, Hikmet (2018) "Exploiting stokes and anti-stokes type emission profiles of aptamer-functionalized luminescent nanoprobes for multiplex sensing applications", Chemistry Select, Vol.3, No.21, 5814-5823 (SCI)
Haghighi Poudeh, Leila and Çakıroğlu, Dilek and Cebeci, Fevzi Çakmak and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2018) "Design of Pt-supported 1D and 3D multilayer graphene-based structural composite electrodes with controlled morphology by core-shell electrospinning/electrospraying", ACS Omega, Vol.3, No.6, 6400-6410 (SCI)
Kocaman, Esat Selim and Yılmaz, Çağatay and Deniz, Ataman and Yıldız, Mehmet (2018) "The performance of embedded fiber Bragg grating sensors for monitoring failure modes of foam cored sandwich structures under flexural loads", Journal of Sandwich Structures and Materials, Vol.20, No.5, 553-577 (SCI)
Ünal, Özlem and Khodadust, Rouhollah and Durmuşoğlu, Emek G. and Erdem, Emre and Yağcı, Mustafa Barış and Ow-Yang, Cleva W. and Yurtsever, Ersin and Yağcı Acar, Havva (2018) "Discovery of an exceptionally strong luminescence of polyethyleneimine-superparamagnetic iron oxide nanoparticles", Macromolecular Chemistry and Physics, Vol.219, No.9 (SCI)
Adatoz, E. Beruhil and Hendessi, Saman and Ow-Yang, Cleva W. and Demirel, A. Levent (2018) "Restructuring of poly(2-ethyl-2-oxazoline)/tannic acid multilayers into fibers", Soft Matter, Vol.14, No.19, 3849-3857 (SCI)
Erdem, Öğüt and Yanık, Cenk and Kaya, İsmet İnönü and Ow-Yang, Cleva W. and Şendur, Kürşat (2018) "Focusing short-wavelength surface plasmons by a plasmonic mirror", Optics Letters, Vol.43, No.9, 2208-2211 (SCI)
Karimzadehkhouei, Mehrdad and Shojaeian, Mostafa and Khalili Sadaghiani, Abdolali and Şendur, Kürşat and Mengüç, M. Pınar and Koşar, Ali (2018) "Entropy generation analysis of laminar flows of water-based nanofluids in horizontal minitubes under constant heat flux conditions", Entropy, Vol.20, No.4 (SCI)
Shojaeian, Mostafa and Nedaei, Masoumeh and Yıldız, Mehmet and Koşar, Ali (2018) "Numerical heat transfer and entropy analysis on liquid slip flows through parallel-plate microchannels", Journal of Thermal Science and Engineering Applications, Vol.10, No.2 (SCI)
Sadeghi, Sadra and Bahmani Jalali, Houman and Melikov, Rustamzhon and Kumar, Baskaran Ganesh and Mohammadi Aria, Mohammad and Ow-Yang, Cleva W. and Nizamoğlu, Sedat (2018) "Stokes-shift-engineered indium phosphide quantum dots for efficient luminescent solar concentrators", ACS Applied Materials & Interfaces, Vol.10, No.15, 12975-12982 (SCI)
Al-Gebory, Layth and Mengüç, M. Pınar and Koşar, Ali and Şendur, Kürşat (2018) "Effect of electrostatic stabilization on thermal radiation transfer in nanosuspensions: Photo-thermal energy conversion applications", Renewable Energy, Vol.119, 625-640 (SCI)
Ozbulut, M. and Tofighi, N. and Goren, O. and Yıldız, Mehmet (2018) "Investigation of wave characteristics in oscillatory motion of partially filled rectangular tanks", Journal of Fluids Engineering, Transactions of the ASME, Vol.140, No.4 (SCI)
Ghorbani, Morteza and Sözer, Canberk and Alcan, Gökhan and Ünel, Mustafa and Ekici, Sinan and Üvet, Hüseyin and Koşar, Ali (2018) "Biomedical device prototype based on small scale hydrodynamic cavitation", AIP Advances, Vol.8, No.3 (SCI)
Khalili Sadaghiani, Abdolali and Motezakker, Ahmad Reza and Kasap, Sibel and Kaya, İsmet İnönü and Koşar, Ali (2018) "Foamlike 3D graphene coatings for cooling systems involving phase change", ACS Omega, Vol.3, No.3, 2804-2811 (SCI)
Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Pappas, Panagiotis-Nektarios and Galiotis, Costas and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2018) "Tailoring viscoelastic response, self-heating and deicing properties of carbon-fiber reinforced epoxy composites by graphene modification", Composites Part A: Applied Science and Manufacturing, Vol.106, 1-10 (SCI)
Penkler, David L. and Atılgan, Canan and Taştan Bishop, Özlem (2018) "Allosteric modulation of human Hsp90α conformational dynamics", Journal of Chemical Information and Modeling, Vol.58, No.2, 383-404 (SCI)
Ross, Caroline Jane and Atılgan, Ali Rana and Taştan Bishop, Özlem and Atılgan, Canan (2018) "Unraveling the motions behind Enterovirus 71 uncoating", Biophysical Journal, Vol.114, No.4, 822-838 (SCI)
Ghorbani, Morteza and Alcan, Gökhan and Khalili Sadaghiani, Abdolali and Mohammadi, Ali and Ünel, Mustafa and Gözüaçık, Devrim and Koşar, Ali (2018) "Characterization and pressure drop correlation for sprays under the effect of micro scale cavitation", Experimental Thermal and Fluid Science, Vol.91, 89-102 (SCI)
Khalili Sadaghiani, Abdolali and Koşar, Ali (2018) "Numerical investigations on the effect of fin shape and surface roughness on hydrothermal characteristics of slip flows in microchannels with pin fins", International Journal of Thermal Sciences, Vol.124, 375-386 (SCI)
Sohouli, A. and Yıldız, Mehmet and Suleman, A. (2018) "Efficient strategies for reliability-based design optimization of variable stiffness composite structures", Structural and Multidisciplinary Optimization, Vol.57, No.2, 689-704 (SCI)
Yılmaz, Çağatay and Akalın, Çağdaş and Günal, İbrahim and Çelik, Hakan and Büyük, Murat and Suleman, Afzal and Yıldız, Mehmet (2018) "A hybrid damage assessment for E-and S-glass reinforced laminated composite structures under in-plane shear loading", Composite Structures, Vol.186, 347-354 (SCI)
Kefal, Adnan and Mayang, Jimmy Bunga and Öterkuş, Erkan and Yıldız, Mehmet (2018) "Three dimensional shape and stress monitoring of bulk carriers based on iFEM methodology", Ocean Engineering, Vol.147, 256-267 (SCI)
Sadaghiani, Abdolali Khalili and Saadi, Nazwat S. and Semsari Parapari, Sorour and Karabacak, Tansel and Keskinöz, Mehmet and Koşar, Ali (2017) "Boiling heat transfer performance enhancement using micro and nano structured surfaces for high heat flux electronics cooling systems", Applied Thermal Engineering, Vol.127, 484-498 (SCI)
Karimzadehkhouei, Mehrdad and Sezen, Meltem and Şendur, Kürşat and Mengüç, M. Pınar and Koşar, Ali (2017) "Subcooled flow boiling heat transfer of gamma-Al2O3/water nanofluids in horizontal microtubes and the effect of surface characteristics and nanoparticle deposition", Applied Thermal Engineering, Vol.127, 536-546 (SCI)
Motezakker, Ahmad Reza and Khalili Sadaghiani, Abdolali and Akkoç, Yunus and Semsari Parapari, Sorour and Gözüaçık, Devrim and Koşar, Ali (2017) "Surface modifications for phase change cooling applications via crenarchaeon Sulfolobus solfataricus P2 bio-coatings", Scientific Reports, Vol.7 (SCI)
Kefal, Adnan and Yıldız, Mehmet (2017) "Modeling of sensor placement strategy for shape sensing and structural health monitoring of a wing-shaped sandwich panel using inverse finite element method", Sensors, Vol.17, No.12 (SCI)
Abdizadeh, Haleh and Atılgan, Ali Rana and Atılgan, Canan and Dedeoğlu, Burcu (2017) "Computational approaches for deciphering the equilibrium and kinetic properties of iron transport proteins", Metallomics, Vol.9, No.11, 1513-1533 (SCI)
Khalili Sadaghiani, Abdolali and Motezakker, Ahmad Reza and Özpınar, Alsan Volkan and Özaydın İnce, Gözde and Koşar, Ali (2017) "Pool boiling heat transfer characteristics of inclined pHEMA-coated surfaces", Journal of Heat Transfer (SI), Vol.139, No.11 (CPCI-S, SCI)
Avaz, Merve Senem and Oğuz, Oğuzhan and Kurt, Hasan and Menceloğlu, Yusuf Z. and Atılgan, Canan (2017) "Soft segment length controls morphology of poly(ethylene oxide) based segmented poly(urethane-urea) copolymers in a binary solvent", Computational Materials Science, Vol.138, 58-69 (SCI)
Demir, Ebru and Yeşilyurt, Serhat (2017) "Low reynolds number swimming of helical structures in circular channels", Journal of Fluids and Structures, Vol.74, 234-246 (SCI)
Ghorbani, Morteza and Mohammadi, Ali and Motezakker, Ahmad Reza and Villanueva, Luis Guillermo and Leblebici, Yusuf and Koşar, Ali (2017) "Energy harvesting in microscale with cavitating flows", ACS Omega, Vol.2, No.10, 6870-6877 (ESCI)
Yılmaz, Çağatay and Yıldız, Mehmet (2017) "A study on correlating reduction in Poisson's ratio with transverse crack and delamination through acoustic emission signals", Polymer Testing, Vol.63, 47-53 (SCI)
Brown, David K. and Penkler, David L. and Amamuddy, Olivier Sheik and Ross, Caroline and Atılgan, Ali Rana and Atılgan, Canan and Bishop, Özlem Taştan (2017) "MD-TASK: a software suite for analyzing molecular dynamics trajectories", Bioinformatics, Vol.33, No.17, 2768-2771 (SCI)
Nedaei, Masoumeh and Motezakker, Ahmad Reza and Zeybek, Mehmet Can and Sezen, Meltem and Özaydın İnce, Gözde and Koşar, Ali (2017) "Subcooled flow boiling heat transfer enhancement using polyperfluorodecylacrylate (pPFDA) coated microtubes with different coating thicknesses", Experimental Thermal and Fluid Science, Vol.86, 130-140 (SCI)
Özbey, Arzu and Karimzadehkhouei, Mehrdad and Sefiane, Khellil and Koşar, Ali (2017) "Changing bubble dynamics in subcooled boiling with TiO2 nanoparticles on a platinum wire", Journal of Molecular Liquids, Vol.242, 456-470 (SCI)
Keçebaş, Muhammed Ali and Mengüç, Pınar and Koşar, Ali and Şendur, Kürşat (2017) "Passive radiative cooling design with broadband optical thin-film filters", Journal of Quantitative Spectroscopy & Radiative Transfer, Vol.198, 179-186 (SCI)
Sohouli, A. and Yıldız, Mehmet and Suleman, A. (2017) "Design optimization of thin-walled composite structures based on material and fiber orientation", Composite Structures, Vol.176, 1081-1095 (SCI)
Karimzadehkhouei, Mehrdad and Özbey, Arzu and Sefiane, Khellil and Koşar, Ali (2017) "Stick and oscillatory behavior of bubbles due to TiO2 nanoparticle coating
in subcooled pool boiling on a wire", Applied Physics Letters, Vol.111, No.6 (SCI)
Kosir, Mateja and Ceh, Miran and Ow-Yang, Cleva W. and Gilmeau, Emmanuel and Bernik, Slavko (2017) "Structural features and thermoelectric properties of Al-doped (ZnO)(5)In2O3 homologous phases", Journal of the American Ceramic Society, Vol.100, No.8, 3712-3721 (SCI)
Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Yılmaz, Çağatay and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2017) "Monitoring the interface and bulk self-healing capability of tri-axial electrospun fibers in glass fiber reinforced epoxy composites", Composites Part A: Applied Science and Manufacturing, Vol.99, 221-232 (SCI)
Çaldağ, Hakan Osman and Acemoğlu, Alperen and Yeşilyurt, Serhat (2017) "Experimental characterization of helical swimming trajectories in circular channels", Microfluidics and Nanofluidics, Vol.21, No.8 (SCI)
Akgönül, Sarp and Özbey, Arzu and Karimzadehkhouei, Mehrdad and Gözüaçık, Devrim and Koşar, Ali (2017) "The effect of asymmetry on micromixing in curvilinear microchannels", Microfluidics and Nanofluidics, Vol.21, No.7 (SCI)
Shojaeian, Mostafa and Karimzadehkhouei, Mehrdad and Koşar, Ali (2017) "Experimental investigation on convective heat transfer of non-Newtonian flows of Xanthan gum solutions in microtubes", Experimental Thermal and Fluid Science, Vol.85, 305-312 (SCI)
Jamalabadi, Mohammad Yaghoub Abdollahzadeh and DaqiqShirazi, Mohammadreza and
Koşar, Ali and Shadloo, Mostafa Safdari (2017) "Effect of injection angle, density ratio, and viscosity on droplet formation in a microfluidic T-junction". Published Online First
http://dx.doi.org/10.1016/j.taml.2017.06.002Mehrtash, Mehdi and Tari, İlker and Yeşilyurt, Serhat (2017) "Impacts of inhomogeneous clamping force on local performance and liquid water formation in polymer electrolyte fuel cells", International Journal of Hydrogen Energy, Vol.42, No.30, 19227-19245 (SCI)
Penkler, David and Şensoy, Özge and Atılgan, Canan and Tastan Bishop, Özlem (2017) "Perturbation-response scanning reveals key residues for allosteric control in Hsp70", Journal of Chemical Information and Modeling, Vol.57, No.6, 1359-1374 (SCI)
Karimzadehkhouei, Mehrdad and Shojaeian, Mostafa and Şendur, Kürşat and Mengüç, M. Pınar and Koşar, Ali (2017) "The effect of nanoparticle type and nanoparticle mass fraction on heat
transfer enhancement in pool boiling", International Journal of Heat and Mass Transfer, Vol.109, 157-166 (SCI)
Esmaeili Aliabadi, Danial and Kaya, Murat and Şahin, Güvenç (2017) "Competition, risk and learning in electricity markets: an agent-based simulation study", Applied Energy, Vol.195, 1000-1011 (SCI, SSCI)
Mohammadi, Ali and Koşar, Ali (2017) "Hydrodynamic and thermal performance of microchannels with different staggered arrangements of cylindrical micro pin fins", Journal of Heat Transfer, Vol.139, No.6 (SCI)
Ullah, Mohib and Seyyed Monfared Zanjani, Jamal and Haghighi Poudeh, Leila and Siddiq, M. and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2017) "Manufacturing functionalized mono-crystalline diamond containing electrospun fibers reinforced epoxy composites with improved mechanical characteristics", Diamond and Related Materials, Vol.76, 90-96 (SCI)
Abdizadeh, Haleh and Tamer, Yusuf Talha and Acar, Ömer and Toprak, Erdal and Atılgan, Ali Rana and Atılgan, Canan (2017) "Increased substrate affinity in the escherichia coli L28R dihydrofolate reductase mutant causes trimethoprim resistance", Physical Chemistry Chemical Physics, Vol.19, No.18, 11416-11428 (SCI)
Abdizadeh, Haleh and Atılgan, Ali Rana and Atılgan, Canan (2017) "Mechanisms by which salt concentration moderates the dynamics of human serum transferrin", Journal of Physical Chemistry B, Vol.121, No.18, 4778-4789 (SCI)
Sadaghiani, Abdolali Khalili and Koşar, Ali (2017) "Experimental study on subcooled flow boiling in horizontal microtubes and effect of heated length", Heat Transfer Engineering (SI), Vol.38, No.3, 313-322 (SCI)
Özden-Yenigün, Elif and Atılgan, Canan and Elliott, James A. (2017) "Multi-scale modelling of carbon nanotube reinforced crosslinked interfaces", Computational Materials Science, Vol.129, 279-289 (SCI)
Furuncuoğlu Özaltın, Tuğba and Aviyente, Viktorya and Atılgan, Canan and Demirel, Levent (2017) "Multiscale modeling of poly(2-isopropyl-2-oxazoline) chains in aqueous solution", European Polymer Journal, Vol.88, 594-604 (SCI)
Vasileva, G. Yu and Smirnov, D. and Vasilyev, Yu B. and Nestoklon, M. O. and Averkiev, N. S. and Novikov, S. and
Kaya, İsmet İnönü and Haug, R. J. (2017)
"Strongly temperature dependent resistance of meander-patterned graphene",
Applied Physics Letters, Vol.110, No.11 (SCI)
Khabbaz Abkenar, Sirous and Tufani, Ali and Özaydın İnce, Gözde and Kurt, Hasan and Turak, Ayşe and Ow-Yang, Cleva W. (2017) "Transfer printing gold nanoparticle arrays by tuning the surface hydrophilicity of thermo-responsive poly n-isopropylacrylamide (pNIPAAm)", Nanoscale, Vol.9, No.9, 2969-2973 (SCI)
Önol, Aykut Özgün and Yeşilyurt, Serhat (2017) "Effects of wind gusts on a vertical axis wind turbine with high solidity", Journal of Wind Engineering and Industrial Aerodynamics, Vol.162, 1-11 (SCI)
Şensoy, Özge and Atılgan, Ali Rana and Atılgan, Canan (2017) "FbpA iron storage and release are governed by periplasmic microenvironments", Physical Chemistry Chemical Physics, Vol.19, No.8, 6064-6075 (SCI)
Kurt, Hasan and Alpaslan, Ece and Yıldız, Burçin and Taralp, Alpay and Ow-Yang, Cleva W. (2017) "Conformation-mediated Forster resonance energy transfer (FRET) in blue-emitting polyvinylpyrrolidone (PVP)-passivated zinc oxide (ZnO) nanoparticles", Journal of Colloid and Interface Science, Vol.488, 348-355 (SCI)
Esmaeili Aliabadi, Danial and Kaya, Murat and Şahin, Güvenç (2017) "An agent-based simulation of power generation company behavior in electricity markets under different market-clearing mechanisms", Energy Policy, Vol.100, 191-205 (SCI)
Ghorbani, Morteza and Sadaghiani, Abdolali Khalili and Yıldız, Mehmet and Koşar, Ali (2017) "Experimental and numerical investigations on spray structure under the effect of cavitation phenomenon in a microchannel", Journal of Mechanical Science and Technology, Vol.31, No.1, 235-247 (SCI)
Kocaman, Esat Selim and Akay, Erdem and
Yılmaz, Çağatay and Türkmen, Halit Süleyman and
Mısırlıoğlu, Burç and Suleman, Afzal and
Yıldız, Mehmet (2017)
"Monitoring the damage state of fiber reinforced composites using an FBG network for failure prediction",
Materials, Vol.10, No.1 (SCI)
Yüksel, Tuğçe and Litster, Shawn and Viswanathan, Venkatasubramanian and Michalek, Jeremy J. (2017) "Plug-in hybrid electric vehicle LiFePO4 battery life implications of thermal management, driving conditions, and regional climate", Journal of Power Sources, Vol.338, 49-64 (SCI)
Mohammadi, Ali and Koşar, Ali (2016) "Hydrodynamic and thermal performance of microchannels with different in-line arrangements of cylindrical micropin fins", Journal of Heat Transfer, Vol.138, No.12 (SCI)
Esmaeili Aliabadi, Danial and Kaya, Murat and Şahin, Güvenç (2016) "Determining collusion opportunities in deregulated electricity markets", Electric Power Systems Research, Vol.141, 432-441 (SCI)
Khani, Navid and Yıldız, Mehmet and Koç, Bahattin (2016) "Elastic properties of coiled carbon nanotube reinforced nanocomposite: a finite element study", Materials & Design, Vol.109, 123-132 (SCI)
Khalili Sadaghiani, Abdolali and Yıldız, Mehmet and Koşar, Ali (2016) "Numerical modeling of convective heat transfer of thermally developing nanofluid flows in a horizontal microtube", International Journal of Thermal Sciences, Vol.109, 54-69 (SCI)
Bayraktar, Öznur and Oral, Özlem and Kocatürk, Nur Mehpare and Akkoç, Yunus and Eberhart, Karin and Koşar, Ali and Gözüaçık, Devrim (2016) "IBMPFD disease-causing mutant VCP/p97 proteins are targets of autophagic-lysosomal degradation", PLoS One, Vol.11, No.10 (SCI)
Şişman, Yağmur and Khalili Sadaghiani, Abdolali and Khedir, Khedir R. and Brozak, Matthew and Karabacak, Tansel and Koşar, Ali (2016) "Subcooled flow boiling over microstructured plates in rectangular minichannels", Nanoscale and Microscale Thermophysical Engineering, Vol.20, No.3-4, 173-190 (SCI)
Tofighi, Nima and Özbulut, Murat and Feng, James J. and Yıldız, Mehmet (2016) "The effect of normal electric field on the evolution of immiscible Rayleigh-Taylor instability", Theoretical and Computational Fluid Dynamics, Vol.30, No.5, 469-483 (SCI)
Shojaeian, Mostafa and Yıldızhan, Melike Mercan and Coşkun, Ömer and Özkalay, Ebrar and Tekşen, Yiğit and Gülgün, Mehmet Ali and Yağcı Acar, Havva and Koşar, Ali (2016) "Investigation of change in surface morphology of heated surfaces upon pool boiling of magnetic fluids under magnetic actuation", Materials Research Express, Vol.3, No.9 (SCI)
Karimzadehkhouei, Mehrdad and Ghorbani, Morteza and Sezen, Meltem and Şendur, Kürşat and Mengüç, M. Pınar and Leblebici, Yusuf and Koşar, Ali (2016) "Increasing the stability of nanofluids with cavitating flows in micro orifices", Applied Physics Letters, Vol.109, No.10, 247-251 (SCI)
Tekirdağ Koşar, Kumsal Ayşe and Akkoç, Yunus and Koşar, Ali and Gözüaçık, Devrim (2016) "MIR376 family and cancer", Histology and Histopathology, Vol.31, No.8, 841-855 (SCI)
Kurt, Hasan and
Ow-Yang, Cleva W. (2016) "Impedance spectroscopy analysis of the photophysical dynamics due to the nanostructuring of anode interlayers in organic photovoltaics". Published Online First
http://dx.doi.org/10.1002/pssa.201600314 Yılmaz, Çağatay and Akalın, Çağdaş and Kocaman, Esat Selim and Suleman, A. and Yıldız, Mehmet (2016) "Monitoring Poisson's ratio of glass fiber reinforced composites as damage index using biaxial Fiber Bragg Grating sensors", Polymer Testing, Vol.53, 98-107 (SCI)
Jia, Junjun and Ow-Yang, Cleva W. and İnan Akmehmet, Güliz and Nakamura, Shin-ichi and Kato, Kunihisa and Shigesato, Yuzo (2016) "Formation of homologous In2O3(ZnO)(m) thin films and its thermoelectric properties", Journal of Vacuum Science and Technology A, Vol.34, No.4 (SCI)
Ghorbani, Morteza and Yıldız, Mehmet and Gözüaçık, Devrim and Koşar, Ali (2016) "Cavitating nozzle flows in micro- and minichannels under the effect of turbulence", Journal of Mechanical Science and Technology, Vol.30, No.6, 2565-2581 (SCI)
Mokkapati, Raghu Sarma and Özgüz, Volkan Hüsnü and Koşar, Ali (2016) "Experimental evidence and theoretical analysis of nanobubble stability within graphene nanoscrolls", Journal of Nanoscience and Nanotechnology, Vol.16, No.6, 6425-6431 (SCI)
İnan Akmehmet, Güliz and Sturm, Saso and Bocher, Laura and Kociak, Mathieu and Ambrozic, Bojan and Ow-Yang, Cleva W. (2016) "Structure and luminescence in long persistence Eu, Dy, and B codoped strontium aluminate phosphors: the Boron effect", Journal of the American Ceramic Society, Vol.99, No.6, 2175-2180 (SCI)
Ghorbani, Morteza and Oral, Özlem and Ekici, Sinan and Gözüaçık, Devrim and Koşar, Ali (2016) "Review on lithotripsy and cavitation in urinary stone therapy", IEEE Reviews in Biomedical Engineering, Vol.9, 264-283 (NA)
Ghorbani, Morteza and
Alcan, Gökhan and
Ünel, Mustafa and
Gözüaçık, Devrim and
Ekici, Sinan and Üvet, Hüseyin and
Şabanoviç, Asif and
Koşar, Ali (2016) "Visualization of microscale cavitating flow regimes via particle shadow sizing imaging and vision based estimation of the cone angle". Published Online First
http://dx.doi.org/10.1016/j.expthermflusci.2016.04.026 Abdizadeh, Haleh and Atılgan, Canan (2016) "Predicting long term cooperativity and specific modulators of receptor interactions in human transferrin from dynamics within a single microstate", Physical Chemistry Chemical Physics, Vol.18, No.11, 7916-7926 (SCI)
Nedaei, Masoumeh and Armağan, Efe and Sezen, Meltem and Özaydın İnce, Gözde and Koşar, Ali (2016) "Enhancemet of flow boiling heat transfer in pHEMA/pPFDA coated microtubes with longitudinal variations in wettability", AIP Advances, Vol.6, No.3 (SCI)
Shojaeian, Mostafa and Koşar, Ali (2016) "Convective heat transfer of non-Newtonian power-law slip flows with variable thermophysical properties in parallel-plate and circular microchannels", International Journal of Thermal Sciences, Vol.100, 155-168 (SCI)
Khalili Sadaghiani, Abdolali and Koşar, Ali (2016) "Numerical and experimental investigation on the effects of diameter and
length on high mass flux subcooled flow boiling in horizontal microtubes", International Journal of Heat and Mass Transfer, Vol.92, 824-837 (SCI)
Shojaeian, Mostafa and Sezen, Meltem and Koşar, Ali (2016) "Pool boiling heat transfer characteristics of non-Newtonian Xanthan gum solutions", Experimental Thermal and Fluid Science, Vol.70, 77-84 (SCI)
Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2016) "Nano-engineered design and manufacturing of high-performance epoxy matrix composites with carbon fiber/selectively integrated graphene as multi-scale reinforcements", RSC Advances, Vol.6, No.12, 9495-9506 (SCI)
Keulen, Casey J. and Akay, Erdem and Melemez, Fazlı Fatih and Kocaman, Esat Selim and Deniz, Ataman and Yılmaz, Çağatay and Boz, Talha and Yıldız, Mehmet and Türkmen, Halit S. and Suleman, Afzal (2016) "Prediction of fatigue response of composite structures by monitoring the strain energy release rate with embedded fiber Bragg gratings", Journal of Intelligent Material Systems and Structures, Vol.27, No.1, 17-27 (SCI)
Abdizadeh, Haleh and Güven, Gökçe and Atılgan, Ali Rana and Atılgan, Canan (2015) "Perturbation response scanning specifies key regions in subtilisin serine protease for both function and stability", Journal of Enzyme Inhibition and Medicinal Chemistry, Vol.30, No.6, 867-873 (SCI)
Ghorbani, Morteza and Alcan, Gökhan and Yılmaz, D. and Ünel, Mustafa and Koşar, Ali (2015) "Visualization and image processing of spray structure under the effect of cavitation phenomenon", Journal of Physics: Conference Series, Vol.656 (SCI)
Özbaykal, Gizem and Atılgan, Ali Rana and Atılgan, Canan (2015) "In silico mutational studies of Hsp70 disclose sites with distinct functional attributes", Proteins: Structure, Function and Bioinformatics, Vol.83, No.11, 2077-2090 (SCI)
Oral, Özlem and Çıkım, Taha Abdullah and Zuvin, Merve and Ünal, Özlem and Yağcı-Acar, Havva and Gözüaçık, Devrim and Koşar, Ali (2015) "Effect of varying magnetic fields on targeted gene delivery of nucleic acid-based molecules", Annals of Biomedical Engineering, Vol.43, No.11, 2816-2826 (SCI)
İzci, Türker and Koz, Mustafa and Koşar, Ali (2015) "The effect of micro pin-fin shape on thermal and hydraulic performance of micro pin-fin heat sinks", Heat Transfer Engineering, Vol.36, No.17, 1447-1457 (SCI)
Kurt, Hasan and Jia, Junjun and Shigesato, Yuzo and Ow-Yang, Cleva W. (2015) "Tuning hole charge collection efficiency in polymer photovoltaics by optimizing the work function of indium tin oxide electrodes with solution-processed LiF nanoparticles", Journal of Materials Science: Materials in Electronics, Vol.26, No.11, 9205-9212 (SCI)
Karimzadehkhouei, Mehrdad and Yalçın, Sinan Eren and Şendur, Kürşat and Mengüç, Pınar and Koşar, Ali (2015) "Pressure drop and heat transfer characteristics of nanofluids in horizontal microtubes under thermally developing flow conditions", Experimental Thermal and Fluid Science (SI), Vol.67, 37-47 (SCI)
Üzüşen, Doğan and Demir, Ebru and Perk, Osman Yavuz and Oral, Özlem and Ekici, Sinan and Ünel, Mustafa and Gözüaçık, Devrim and Koşar, Ali (2015) "Assessment of probe-to-specimen distance effect in kidney stone treatment with
hydrodynamic cavitation", Journal of Medical Devices, Vol.9, No.3 (SCI)
Acemoğlu, Alperen and Yeşilyurt, Serhat (2015) "Effects of poiseuille flows on swimming of magnetic helical robots in circular channels", Microfluidics and Nanofluidics (SCI)
Tofighi, Nima and Özbulut, Murat and Rahmat, Amin and Feng, James J. and Yıldız, Mehmet (2015) "An incompressible smoothed particle hydrodynamics method for the motion of rigid bodies in fluids", Journal of Computational Physics, Vol.297, 207-220 (SCI)
Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2015) "Design and fabrication of multi-walled hollow nanofibers by triaxial electrospinning as reinforcing agents in nanocomposites", Journal of Reinforced Plastics and Composites, Vol.34, No.16, 1273-1286 (SCI)
Demircan, Özgür and Yılmaz, Çağatay and Kocaman, Esat Selim and Tang, S. and Hamada, H. and Yıldız, Mehmet (2015) "Effect of fiber densities on impact properties of biaxial warp-knitted textile composites", Journal of Reinforced Plastics and Composites, Vol.34, No.16, 1287-1297 (SCI)
Kasap, Sibel and Khaksaran, Mohammad Hadi and Çelik, Süleyman and Özkaya, Hasan and Yanık, Cenk and Kaya, İsmet İnönü (2015) "Controlled growth of large area multilayer graphene on copper by chemical vapour deposition", Physical Chemistry Chemical Physics, Vol.17, No.35, 23081-23087 (SCI)
Abdizadeh, Haleh and Atılgan, Ali Rana and Atılgan, Canan (2015) "Detailed molecular dynamics simulations of human transferrin provide insights into iron release dynamics at serum and endosomal pH", Journal of Biological Inorganic Chemistry, Vol.20, No.4, 705-718 (SCI)
Shojaeian, Mostafa and Koşar, Ali (2015) "Pool boiling and flow boiling on micro- and nanostructured surfaces", Experimental Thermal and Fluid Science, Vol.63, 45-73 (SCI)
Kocaman, Esat Selim and Keulen, Casey J. and Akay, Erdem and
Yıldız, Mehmet and Türkmen, Halit S. and Suleman, Afzal (2015) "An experimental study on the effect of length and orientation of embedded FBG sensors on the signal properties under fatigue loading". Published Online First
http://dx.doi.org/10.1515/secm-2014-0029 Özbey, Arzu and Karimzadehkhouei, Mehrdad and Yalçın, Sinan Eren and Gözüaçık, Devrim and Koşar, Ali (2015) "Modeling of ferrofluid magnetic actuation with dynamic magnetic fields in small channels", Microfluidics and Nanofluidics, Vol.18, No.3, 447-460 (SCI)
Temel, Fatma Zeynep and Yeşilyurt, Serhat (2015) "Confined swimming of bio-inspired microrobots in rectangular channels", Bioinspiration and Biomimetics, Vol.10, No.1 (SCI)
Shojaeian, Mostafa and Yıldız, Mehmet and Koşar, Ali (2015) "Convective heat transfer and second law analysis of non-Newtonian fluid flows with variable thermophysical properties in circular channels", International Communications in Heat and Mass Transfer, Vol.60, 21-31 (SCI)
Zanjani, Jamal Seyyed Monfared and Saner Okan, Burcu and Letofsky-Papst, Ilse and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2015) "Rational design and direct fabrication of multi-walled hollow electrospun fibers with controllable structure and surface properties", European Polymer Journal (SI), Vol.62, 66-76 (SCI)
Acemoğlu, Alperen and Temel, Fatma Zeynep and Yeşilyurt, Serhat (2014) "Characterization and modeling of micro swimmers with helical tails and cylindrical heads inside circular channels", Journal of Fluids Engineering, Vol.136, No.12 (SCI)
Güven, Gökçe and Atılgan, Ali Rana and Atılgan, Canan (2014) "Protonation states of remote residues affect binding-release dynamics of the ligand but not the conformation of apo ferric binding protein", Journal of Physical Chemistry B, Vol.118, No.40, 11677-11687 (SCI)
Shojaeian, Mostafa and Yıldız, Mehmet and Koşar, Ali (2014) "Heat transfer characteristics of plug flows with temperature-jump boundary conditions in parallel-plate channels and concentric annuli", International Journal of Thermal Sciences, Vol.84, 252-259 (SCI)
Demir, Ebru and İzci, Türker and Khudhayer, Wisam J. and Alagöz, Arif Sinan and Karabacak, Tansel and Koşar, Ali (2014) "The effect of nanostructure distribution on subcooled boiling heat transfer enhancement over nanostructured plates integrated into a rectangular channel", Nanoscale and Microscale Thermophysical Engineering, Vol.18, No.4, 313-328 (SCI)
Rahmat, Amin and Tofighi, Nima and Safdari Shadloo, Mostafa and Yıldız, Mehmet (2014) "Numerical simulation of wall bounded and electrically excited Rayleigh-Taylor instability using incompressible smoothed particle hydrodynamics", Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol.460, 60-70 (SCI)
Gözüaçık, Devrim and Yağcı-Acar, Havva Funda and Akkoç, Yunus and Koşar, Ali and Doğan-Ekici, Işın and Ekici, Sinan (2014) "Anticancer use of nanoparticles as nucleic acid carriers", Journal of Biomedical Nanotechnology (SI), Vol.10, No.9, 1751-1783 (SCI)
Demir, Ebru and İzci, Türker and Alagöz, Arif Sinan and Karabacak, Tansel and Koşar, Ali (2014) "Effect of silicon nanorod length on horizontal nanostructured plates in pool boiling heat transfer with water", International Journal of Thermal Sciences, Vol.82, 111-121 (SCI)
Çıkım, Taha Abdullah and Gözüaçık, Devrim and Koşar, Ali (2014) "Power reclamation efficiency of a miniature energy-harvesting device using external fluid flows", lnternational Journal of Energy Research, Vol.38, No.10, 1318-1330 (SCI)
Çıkım, Taha Abdullah and Armağan, Efe and Özaydın İnce, Gözde and Koşar, Ali (2014) "Flow boiling enhancement in microtubes with crosslinked pHEMA coatings and the effect of coating thickness", Journal of Heat Transfer, Vol.136, No.8 (SCI)
Ow-Yang, Cleva W. and Jia, Junjun and Aytun, Taner and Zamboni, Michael E. and Turak, Ayşe Z. and Sarıtaş, Kayahan and Shigesato, Yuzo (2014)
"Work function tuning of tin-doped indium oxide electrodes with solution-processed lithium fluoride",
Thin Solid Films, Vol.559, 58-63 (SCI)
Kaya, Alihan and Özdemir, Mehmed Rafet and Keskinöz, Mehmet and Koşar, Ali (2014) "The effects of inlet restriction and tube size on boiling instabilities and detection of resulting premature critical heat flux in microtubes using data analysis", Applied Thermal Engineering, Vol.65, No.1-2, 575-587 (SCI)
Shojaeian, Mostafa and Koşar, Ali (2014) "Convective heat transfer and entropy generation analysis on Newtonian and non-Newtonian fluid flows between parallel-plates under slip boundary conditions", International Journal of Heat and Mass Transfer, Vol.70, No.3, 664-673 (SCI)
Kurtoğlu, Evrim and Kaya, Alihan and Gözüaçık, Devrim and Acar, Funda Yağcı and Koşar, Ali (2014) "Experimental study on convective heat transfer performance of iron oxide based ferrofluids in microtubes", Journal of Thermal Science and Engineering Applications, Vol.6, No.3 (SCI)
Özel, Burcu and Örüm, Aslıhan and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2014) "Experimental study on the rheology of anisotropic, flocculated and low volume fraction colloids", Korea-Australia Rheology Journal, Vol.26, No.1, 105-116 (SCI)
Keulen, Casey J. and Yıldız, Mehmet and Suleman, Afzal (2014) "Damage detection of composite plates by Lamb wave ultrasonic tomography with a sparse hexagonal network using damage progression trends", Shock and Vibration (SCI)
Aykut, Ayşe Özlem and Atılgan, Ali Rana and Atılgan, Canan (2013) "Designing molecular dynamics simulations to shift populations of the conformational states of calmodulin", PLoS Computational Biology, Vol.9, No.12 (SCI)
İtah, Zeynep and Oral, Özlem and Perk, Osman Yavuz and Şeşen, Muhsincan and Demir, Ebru and Erbil, Seçil and Doğan-Ekici, A. Işın and Ekici, Sinan and Koşar, Ali and Gözüaçık, Devrim (2013) "Hydrodynamic cavitation kills prostate cells and ablates benign prostatic hyperplasia tissue", Experimental Biology and Medicine, Vol.238, No.11, 1-9 (SCI)
Kaya, Alihan and Demiryürek, Rıdvan and Armağan, Efe and Özaydın İnce, Gözde and Sezen, Meltem and Koşar, Ali (2013) "Boiling heat transfer enhancement in mini/microtubes via polyhydroxyethylmethacrylate (pHEMA) coatings on inner microtube walls at high mass fluxes", Journal of Micromechanics and Microengineering, Vol.23, No.11 (SCI)
Safdari Shadloo, Mostafa and Rahmat, Amin and Yıldız, Mehmet (2013) "A smoothed particle hydrodynamics study on the electrohydrodynamic deformation of a droplet suspended in a neutrally buoyant Newtonian fluid", Computational Mechanics, Vol.52, No.3, 693-707 (SCI)
Özdemir, Mehmed Rafet and Koşar, Ali (2013) "Thermally developing single-phase flows in microtubes", Journal of Heat Transfer, Vol.135, No.7 (SCI)
Sadek, Samir Hassan Mahmoud and Yıldız, Mehmet (2013) "Modeling die swell of second-order fluids using smoothed particle hydrodynamics", Journal of Fluids Engineering, Vol.135, No.5 (SCI)
Safdari Shadloo, Mostafa and Zainali, Amir and Yıldız, Mehmet (2013) "Simulation of single mode Rayleigh-Taylor instability by SPH method", Computational Mechanics, Vol.51, No.5, 699-715 (SCI)
Yanık, Cenk and Kaya, İsmet İnönü (2013) "Local breakdown of the quantum Hall effect in narrow single layer graphene Hall devices", Solid State Communications, Vol.160, 47-51 (SCI)
Şeşen, Muhsincan and Tekşen, Yiğit and Şahin, Berna and Şendur, Kürşat and Mengüç, M. Pınar and Koşar, Ali (2013) "Boiling heat transfer enhancement of magnetically actuated nanofluids", Applied Physics Letters, Vol.102, No.16 (SCI)
Şeşen, Muhsincan and Demir, Ebru and İzci, Türker and Khudhayer, Wisam and Karabacak, Tansel and Koşar, Ali (2013) "Submerged jet impingement cooling using nanostructured plates", International Journal of Heat and Mass Transfer, Vol.59, 414-422 (SCI)
Kaya, Alihan and Özdemir, Mehmed Rafet and Koşar, Ali (2013) "High mass flux flow boiling and critical heat flux in microscale", International Journal of Thermal Sciences, Vol.65, 70-78 (SCI)
Mısırlıoğlu, Burç and Yıldız, Mehmet (2013) "Dielectric response of fully and partially depleted ferroelectric thin films and
inversion of the thickness effect", Journal of Physics D: Applied Physics, Vol.46, No.12 (SCI)
Kaya, İsmet İnönü (2013) "Nonequilibrium transport and the Bernoulli effect of electrons in a two-dimensional electron gas", Modern Physics Letters B, Vol.27, No.4 (SCI)
Zainali, Amir and Tofighi, Nima and Safdari Shadloo, Mostafa and Yıldız, Mehmet (2013) "Numerical investigation of Newtonian and non-Newtonian multiphase flows using ISPH method", Computer Methods in Applied Mechanics and Engineering, Vol.254, 99-113 (SCI)
Çelebi, Cem and Yanık, Cenk and Günay Demirkol, Anıl and Kaya, İsmet İnönü (2013) "Control of the graphene growth rate on capped SiC surface under strong Si confinement", Applied Surface Science, Vol.264, 56-60 (SCI)